milKit Conversion Kit

Blacks

milKit makes tubeless conversion a breeze! This is your one stop shop for converting your mountain bike or road bike to tubeless tires. Running a tubeless set up has many advantages: it is lighter, more resistant to pinch flats, has better traction and avoids ride stopping punctures from thorns and sharp stones. However, before milKit revolutionized tubeless mounting, getting your wheels set up was a long messy job. Checking sealant levels was equally tiresome, so many riders ran the risk of riding without sealant as checks meant more mess!milKit has made this easy:Install rim tapeInstall milKit valves and screw out the milKit valve corePre-inflate your tire up to 22 psi (we recommend the milKit Booster) – the rubber valve flaps ensure no air is lost even without the valve core installedMeasure out the correct amount of sealant and insert into pressurized tire using the syringe: mess-free!Screw the valve core back in and inflate the tire to full riding pressure – the tire now jumps onto the rim fully. You’re ready to ride!Ongoing maintenance is also easy. With other tubeless tire systems you need to remove the tire to check if enough sealant remains, with milKit you can simply remove the valve core and insert the syringe to check. No mess and faster results!The syringe holds 60ml or 2 oz of fluid and comes with a flexible connector and a large needle to push through the valve and rubber flaps. There’s also a sealant regulator that screws into the syringe for easy refilling. The needle has an angled end for effective removal of all sealant in the tire so you know exactly how much sealant is in there.Rubber flaps at the bottom of the valve prevent sealant from filling and blocking the valve, as well as ensuring no air is lost when the core is removed.milKit sealant is thicker than others and always stays a consistent homogenous liquid. There is no need to shake it before use. In the tire, the milKit sealant does not decompose into rubber particles and an aqueous residue, but it dries evenly and slowly and therefore remains effective longer than comparable products.milKit sealant’s microfibers give it a strong puncture sealing capability, with results for tears of up to 6mm. It covers the inside of the tire evenly, and adheres better to the tire wall than thin latex products, so the all-important microfibers are distributed optimally and ready to act as soon as you puncture.The conversion kit contains everything you need to convert to tubeless:milKit valves with rubber flaps that ensure clean and easy setup and maintenancemilKit compact syringe to measure and refill sealant through the milKit valvesmilKit tubeless sealant that stays effective longer and repairs bigger tearsRim tape needed to convert your wheels to tubeless1x milKit sealant bottle 250 ml / 8 oz1x milKit compact syringe system2x 45 mm milKit tubeless valves1x 10m/11yd roll of milKit tubeless rim tape 21, 25, 29, 32 or 35mm/0.82in1x additional needle for syringe filling1x valve core tool

Amazon

Easy conversion: the high-quality rim tape first ensures an airtight rim bed. With the help of the patented milKit valves, converting to tubeless wheels becomes a self-going. Simply insert valves, install the tyre, inflate and finally add the high-quality milKit sealing milk. Thanks to the patented valves, the valve heart can be removed without air loss and the tubeless sealant can be filled. Easy maintenance and filling thanks to the measuring and refill syringe: thanks to the syringe, the sealant can be injected exactly into the tyre to the millilitre. In addition, you save a lot of time refilling sealing milk, as the old tubeless milk can be sucked out of the tyre and new ones can be easily added - without releasing the pressure from the tyre or removing it. Compatible with most common rims: Our tubeless mounting kit is suitable for most rims, both carbon and aluminium rims. The milKit conversion kits differ only in the width of the rim tape. Before selecting the tubeless setup kit, the inner rim width of the rim must be observed to choose the right set. In addition, the tubeless valves included are 45 mm long on all sets. Should the rim height vary greatly, both shorter and longer valves (35 - 75 mm) are available. The set is generally suitable for roads, gravel and MTB tubeless wheels. Extensive conversion and repair kit: the tubeless kit contains 2 x 45 mm milKit valves, 1 x measuring and refill syringe, 1 x additional needle for filling the syringe, 1 x milKit sealing milk 250 ml, 10 m long tubeless rim tape (width depends on set selection), 1 x valve heart tool, 2 x milKit rim stickers, 1 x instruction manual (English language not guaranteed). milKit Makes your tubeless life easier: discover many other innovative products from milKit, such as the award-winning tubeless tyre sealant (test winner in mountain bike magazine) or the unique milKit tubeless booster, which can also be used as a water bottle. The booster is the lightest and most efficient inflation aid and especially suitable for bikers who do not have a portable compressor.