1/2" Wallplate with 15mm Copper Tail x 350mm

Amazon

IMPORTANT SIZING NOTE - Most plumbing products are measured using BSP thread dimensions which measure 1/4 inch larger than that stated, therefore this 1/2 Inch BSP female thread actually measures 3/4 Inch in diameter. This wallplate is used to install an outside tap easily through a typical solid wall up to 300mm thick A hole greater than 15mm diameter should firstly be drilled through the wall and the tail fed through and the plate end holding the 1/2 inch BSP thread then screwed to the outside face of the wall A 1/2 inch BSP bibtap (outside tap) can then be secured to the female thread and the water supply screwed to the plain using 15mm pressfit, pushfit, compression, end feed or pre-soldered fittings, Weight: 0.440924524 Pounds, Manufacturer: Cubralco

Plumbing Superstore

The JTM straight wall plate is an essential component for installing outside taps with a sleek, professional look. Made from corrosion-free copper, it features a sturdy wall plate with three predrilled holes and a 15mm diameter pipe section. Its design includes a 'compression fitting' with a built-in sealing olive ring, ensuring an easy and secure installation. This 15mm x 350mm plate combines the plate and pipe for optimal functionality. It's designed for easy use and effective performance in outdoor tap setups, making it an excellent choice for both professionals and DIY enthusiasts who seek quality and reliability in their plumbing fittings.. JTM Straight Wall Plate - 15mm x 350mm Copper