10 x 3.2mm 350mm Welding Rods Electrodes ARC Rod Mild Steel Rutile cellulosic All positional Type E6013

Prices from
9.58

Sponsored links

Description

Amazon Classified AWS A5.1 E6013 and EN ISO 2560-A E 38 A RC 12, a widely recognised general-purpose electrode standard for mild steel MMA welding; CE marked and made under an ISO 9001 certified quality programme. Rutile-cellulosic coating for manual metal arc (MMA/stick) welding of non-alloy (mild) and low-carbon steels: very active, intensive arc that strikes and re-strikes easily, even on basic AC transformer welders, with good penetration. Runs on AC or DC current, so it suits stick welders including basic transformer sets; strong gap-bridging ability on imperfect joint fit-up; self-releasing slag lifts cleanly away from the weld as it cools, cutting down on chipping and clean-up between passes; 3.2mm rods run at 90 to 130A. Carbon-manganese weld metal: minimum yield strength 380MPa (55,100psi), tensile strength 470 to 600MPa (68,200 to 87,000psi), minimum elongation 20%, 47J average impact at +20°C; smooth, slightly convex beads without undercutting. This pack: 10 rods, 3.2mm x 350mm (0.13 x 13.8in); eight sizes from 2.0mm x 300mm to 5.0mm x 450mm, where smaller diameters (2.0mm and 2.5mm) suit thin sheet, tack welds and root passes, larger diameters (4.0mm and 5.0mm) suit thicker sections and give faster deposition.

Compare webshops (1)

Sponsored links · Some shops pay us a fee

Sort by:

£ 9.58

Description (1)

Classified AWS A5.1 E6013 and EN ISO 2560-A E 38 A RC 12, a widely recognised general-purpose electrode standard for mild steel MMA welding; CE marked and made under an ISO 9001 certified quality programme. Rutile-cellulosic coating for manual metal arc (MMA/stick) welding of non-alloy (mild) and low-carbon steels: very active, intensive arc that strikes and re-strikes easily, even on basic AC transformer welders, with good penetration. Runs on AC or DC current, so it suits stick welders including basic transformer sets; strong gap-bridging ability on imperfect joint fit-up; self-releasing slag lifts cleanly away from the weld as it cools, cutting down on chipping and clean-up between passes; 3.2mm rods run at 90 to 130A. Carbon-manganese weld metal: minimum yield strength 380MPa (55,100psi), tensile strength 470 to 600MPa (68,200 to 87,000psi), minimum elongation 20%, 47J average impact at +20°C; smooth, slightly convex beads without undercutting. This pack: 10 rods, 3.2mm x 350mm (0.13 x 13.8in); eight sizes from 2.0mm x 300mm to 5.0mm x 450mm, where smaller diameters (2.0mm and 2.5mm) suit thin sheet, tack welds and root passes, larger diameters (4.0mm and 5.0mm) suit thicker sections and give faster deposition.


Product specifications

Brand SS8
EAN
  • 5060756648364

Featured Choice
£ 9.58
To Shop