10M Extension Cable with Signal Amplifier for Vecrysit Permanent Outdoor Lights Pro, Active & 2 Waterproof Junction Boxes, Ideal Multi-Floor Long-Span Layouts

Package Contents: 1×10M Extension cable, 2× heavy-duty mounting adhesives, 2× weatherproof terminal enclosures, assorted mounting screws, 1× user quick-start guide, 1× screwdriver. Compatible Equipment: Built to the specifications of the Vecrysit permanent outdoor LED series. Facilitates flawless expansion between any Vecrysit LED strips, with no loss in transmission quality over distance. Function: This 10M cable provides substantial reach while its inline amplifier (drawing no external power) actively counteracts voltage sag and digital data degradation. This ensures the far end of your installation shines with the exact same brightness and hue as the start. Primary Use Cases: Vertical Jumps: Connecting strips from one story to the next. Structural Bridges: Linking lighting systems between separate buildings for unified shows. Obstacle Bypasses: Routing around walls, chimneys, or other architectural barriers over long spans. How to Use: Cut the LED strip where the extension is needed and strip 1cm from the new ends. Connect the extension cable between the two cut ends using the junction boxes, ensuring polarity and direction arrows match. Important: If you need to shorten the cable, you must retain the section containing the signal amplifier (the visible bulge in the cable). The amplifier must always remain in the final circuit to function correctly.