10mm ID Black 1 Metre Length Fuel and Oil Resistant Rubber Hose

📏 10MM (3/8") BORE, 1M LENGTH – 10mm internal diameter, 17mm outside diameter and 3.5mm wall, supplied as one continuous 1 metre length (3.3ft, approx. 0.24 kg), ideal for a short repair or a single fuel line. ⛽ FUEL & OIL RESISTANT – an oil-resistant synthetic rubber tube for petrol, diesel, engine oil and lubricants, also suited to compressed air and water. The 10mm bore suits car, van and motorbike fuel feed and return lines, diesel heater supply lines, and oil and lubrication lines. 🛡️ REINFORCED 3-LAYER BUILD – smooth black oil-resistant synthetic rubber inner tube, high-tensile textile reinforcement layers for strength and stability, and a smooth black NBR rubber cover that resists abrasion, weathering and ozone. 🌡️ -20°C TO +100°C RATED – works continuously from -20°C to +100°C with peaks to +120°C. Every bore is rated 20 bar working and 60 bar burst pressure (3:1 safety factor); the 10mm bore has a 102mm minimum bend radius. 🔧 EASY TO CUT & FIT – trim square with a sharp blade and secure each end with hose clips sized for the 17mm outside diameter. Handy to keep in the garage or van for quick fuel line repairs.