Compare webshops (1)
Sponsored links · Some shops pay us a fee
Shops with other sizes
📏 10MM (3/8") BORE, 30M LENGTH – 10mm internal diameter, 18mm outside diameter and 4mm wall, supplied as one continuous 30 metre length (98.4ft, approx. 6.06 kg), ideal for bulk workshop or fleet use with the fewest joins. 🔧 FLEXIBLE SILICONE TUBING – for coolant, water, air and vacuum lines on vehicles, boats and machinery. The 10mm bore suits heater matrix feed and return pipes, coolant bleed lines and expansion tank connections. 🛡️ 2-PLY POLYESTER REINFORCED – smooth extruded silicone inner, 2-ply polyester braid and a silicone outer layer, made to SAE J20 R3. Resists ozone, ageing, cracking and coolant additives far longer than rubber. Trim the length with a sharp blade for a square, leak-free end. 🌡️ -30°C TO +200°C RATED – continuous operating range -30°C to +200°C with peaks to +220°C. This 10mm bore is rated 9 bar working and 27 bar burst pressure, with a 90mm minimum bend radius. ⚫ BLACK SILICONE – black finish that keeps its colour under bonnet heat. For coolant, water and air only – not suitable for fuel or oil. Use hose clips sized for the 18mm outside diameter.