ODSUPPLIES

15mm x 10mm Reducing Tee End Feed Bag of 10

Name: 15mm x 10mm Reducing Tee End Feed Bag of 10
Brand: ODSUPPLIES
SKU: f7559f0a8ffd49b36257cc92759cfba4

1/1

Image of 15mm x 10mm Reducing Tee End Feed Bag of 10

Amazon

Prices from

9.99

Description

Amazon This listing is for a Pack of 10 These fittings are relatively easy to install and require minimal preparation. They typically involve cleaning the pipe end, applying flux, and soldering the fitting onto the pipe, creating a strong and permanent bond. To prepare copper pipe for end feed fittings, cut it square, deburr the edges, clean the pipe end and fitting socket to bright metal with an abrasive pad, and apply a thin layer of flux before assembly. To solder an end feed fitting, clean and flux the joint, assemble it, heat the copper evenly with a blowtorch until it reaches melting temperature, and apply solder wire to the socket edge so capillary action draws the molten metal into the gap around the entire pipe. WRAS Approved

Compare webshops (2)

Sponsored links · Some shops pay us a fee

Sort by:

£ 9.99

Description (1)

This listing is for a Pack of 10 These fittings are relatively easy to install and require minimal preparation. They typically involve cleaning the pipe end, applying flux, and soldering the fitting onto the pipe, creating a strong and permanent bond. To prepare copper pipe for end feed fittings, cut it square, deburr the edges, clean the pipe end and fitting socket to bright metal with an abrasive pad, and apply a thin layer of flux before assembly. To solder an end feed fitting, clean and flux the joint, assemble it, heat the copper evenly with a blowtorch until it reaches melting temperature, and apply solder wire to the socket edge so capillary action draws the molten metal into the gap around the entire pipe. WRAS Approved