1.6mm Grout Removal Bit Ref. 569 2615056932 Dremel

Dremel 2615056932 Milling Bit. Effortlessly tackle grout removal for tile repairs with the DREMEL 2615056932 Milling Bit. Designed for precision work in bathrooms and toilets, this solid carbide bit is ideal for replacing broken tiles or refreshing worn grout. Its narrow head (1.6mm) easily navigates floor grout, while the angled attachment with guide points ensures controlled, gentle pulling for optimal results. Achieve clean grout removal without damaging your tiles by following the recommended slow feed rate and avoiding tile contact. For deeper grout removal, multiple passes may be necessary. This essential accessory for electric multi-tools offers a working length of 6.0mm and a maximum RPM of 20.000 for efficient repairs. This bit is used to remove the grout between tiles in e.g. Bathrooms or toilets. Ideal for replacing wall and floor grout or removing grout to replace broken tiles. The 569 grout bit tip is generally less than the distance between wall tiles (diameter of head: 3.2mm). The 570 is designed to get through floor grout and is smaller (diameter of head: 1.6mm). These bits are designed for small repair jobs. If you have a large removal requirement, you may need multiple bits to get through all of the grout. The angled attachment is designed so the bit is pulled gently through the grout – never pushed. Pushing will ruin the bit. There are two guide points on the attachment that will help keep the bit between the tiles Use caution to avoid the bit touching the tile. This accessory is a solid carbide tip and it will nick the tile if it comes in contact with it while the tool is turned on. A slow feed rate through the grout is recommended with some attention in older homes to the metal spacers that may still remain in the grout being removed. To remove a greater depth of grout, start by removing the surface grout. Then adjust the guide to a greater depth and take a second pass. For corners you will need to remove the guide. Keep a steady hand and carefully pull the tool toward you.Materials to use on:- GroutRecommended speed:- 20.000 RPMTechnical details for Grout Removal Bits 1,6 mm:- Drywall/Plasterboard- Aerated ConcreteSpecifications:- Shank diameter: 3,2 mm- Working length: 6,0 mm- Accessory length: 58,0 mm- Width: 3,0 mm- Length: 3,0 mm- Height: 58,0 mm- Maximum RPM: 20.000 1/min. tradeinn Bricoinn

Dremel accessory (569) wall and floor grout removal bit is designed for cleaning wall and floor grout or removing grout to replace broken tiles The grout removal bit is ideal to use on aerated concrete, drywall, plasterboard, grout Recommended to use with the Dremel grout removal attachment (568) for precise guided grout removal and optimal results Working length: 6 mm; working diameter: 1.6 mm; recommended RPM: 20.000 rpm Fits with all Dremel Multi-/Rotary tools or other 3,2mm shank size multi- / rotary tools