AP Automotive

19mm 3/4" ID Silicone Straight Hose Joiner Coupler 100mm Length Blue

Name: 19mm 3/4 ID Silicone Straight Hose Joiner Coupler 100mm Length Blue
Brand: AP Automotive
SKU: 2bd7377648d9e5a1c498abddca78d6cd

1/1

Image of 19mm 3/4" ID Silicone Straight Hose Joiner Coupler 100mm Length Blue

Amazon Marketplace

Prices from

8.75

Description

Amazon 📏 19mm (3/4") ID x 100mm STRAIGHT COUPLER - 19mm internal diameter, 4.5mm wall and 28mm Outside Diameter (OD). The 100mm length bridges small gaps between pipes. Push it over two 19mm pipes or spigots of the same size to make a sealed inline joint. 🔧 BUILT FOR COOLANT & RADIATOR PIPEWORK - at 19mm bore it suits radiator and heater hoses, coolant rails, water pump and thermostat housing joints, on cars, vans, motorbikes, 4x4s, trucks, tractors, plant and industrial machinery. 🌡️ HIGH TEMPERATURE SILICONE -60°C to +180°C - stays flexible through extreme heat and cold and resists ozone, UV and moisture, so it will not harden, crack or perish the way ageing rubber hose does. 🛡️ 3-PLY POLYESTER REINFORCED - 3 layers of polyester fabric inside a 4.5mm silicone wall hold the 19mm bore round under boost pressure and vacuum, with a smooth inner surface for clean airflow and coolant flow. 🔵 BLUE GLOSS FINISH - a smart blue silicone joiner for a tidy engine bay. Cut with a sharp blade for a shorter joint, and secure each end with a hose clip sized for the 28mm Outside Diameter (OD). Also available in red and black.

Compare webshops (2)

Sponsored links · Some shops pay us a fee

Sort by:

£ 8.75

Description (1)

📏 19mm (3/4") ID x 100mm STRAIGHT COUPLER - 19mm internal diameter, 4.5mm wall and 28mm Outside Diameter (OD). The 100mm length bridges small gaps between pipes. Push it over two 19mm pipes or spigots of the same size to make a sealed inline joint. 🔧 BUILT FOR COOLANT & RADIATOR PIPEWORK - at 19mm bore it suits radiator and heater hoses, coolant rails, water pump and thermostat housing joints, on cars, vans, motorbikes, 4x4s, trucks, tractors, plant and industrial machinery. 🌡️ HIGH TEMPERATURE SILICONE -60°C to +180°C - stays flexible through extreme heat and cold and resists ozone, UV and moisture, so it will not harden, crack or perish the way ageing rubber hose does. 🛡️ 3-PLY POLYESTER REINFORCED - 3 layers of polyester fabric inside a 4.5mm silicone wall hold the 19mm bore round under boost pressure and vacuum, with a smooth inner surface for clean airflow and coolant flow. 🔵 BLUE GLOSS FINISH - a smart blue silicone joiner for a tidy engine bay. Cut with a sharp blade for a shorter joint, and secure each end with a hose clip sized for the 28mm Outside Diameter (OD). Also available in red and black.