AP Automotive

19mm 3/4" ID Silicone Straight Hose Joiner Coupler 50mm Length Black

Name: 19mm 3/4 ID Silicone Straight Hose Joiner Coupler 50mm Length Black
Brand: AP Automotive
SKU: 68cd1c55a3fb3a933e6069c694d48d26

1/1

Image of 19mm 3/4" ID Silicone Straight Hose Joiner Coupler 50mm Length Black

Amazon Marketplace

Prices from

7.95

Description

Amazon 📏 19mm (3/4") ID x 50mm STRAIGHT COUPLER - 19mm internal diameter, 4.5mm wall and 28mm Outside Diameter (OD). The 50mm length makes a short joint for tight engine bays. Push it over two 19mm pipes or spigots of the same size to make a sealed inline joint. 🔧 BUILT FOR COOLANT & RADIATOR PIPEWORK - at 19mm bore it suits radiator and heater hoses, coolant rails, water pump and thermostat housing joints, on cars, vans, motorbikes, 4x4s, trucks, tractors, plant and industrial machinery. 🌡️ HIGH TEMPERATURE SILICONE -60°C to +180°C - stays flexible through extreme heat and cold and resists ozone, UV and moisture, so it will not harden, crack or perish the way ageing rubber hose does. 🛡️ 3-PLY POLYESTER REINFORCED - 3 layers of polyester fabric inside a 4.5mm silicone wall hold the 19mm bore round under boost pressure and vacuum, with a smooth inner surface for clean airflow and coolant flow. ⚫ BLACK GLOSS FINISH - a smart black silicone joiner for a tidy engine bay. Cut with a sharp blade for a shorter joint, and secure each end with a hose clip sized for the 28mm Outside Diameter (OD). Also available in blue and red.

Compare webshops (2)

Sponsored links · Some shops pay us a fee

Sort by:

£ 7.95

Description (1)

📏 19mm (3/4") ID x 50mm STRAIGHT COUPLER - 19mm internal diameter, 4.5mm wall and 28mm Outside Diameter (OD). The 50mm length makes a short joint for tight engine bays. Push it over two 19mm pipes or spigots of the same size to make a sealed inline joint. 🔧 BUILT FOR COOLANT & RADIATOR PIPEWORK - at 19mm bore it suits radiator and heater hoses, coolant rails, water pump and thermostat housing joints, on cars, vans, motorbikes, 4x4s, trucks, tractors, plant and industrial machinery. 🌡️ HIGH TEMPERATURE SILICONE -60°C to +180°C - stays flexible through extreme heat and cold and resists ozone, UV and moisture, so it will not harden, crack or perish the way ageing rubber hose does. 🛡️ 3-PLY POLYESTER REINFORCED - 3 layers of polyester fabric inside a 4.5mm silicone wall hold the 19mm bore round under boost pressure and vacuum, with a smooth inner surface for clean airflow and coolant flow. ⚫ BLACK GLOSS FINISH - a smart black silicone joiner for a tidy engine bay. Cut with a sharp blade for a shorter joint, and secure each end with a hose clip sized for the 28mm Outside Diameter (OD). Also available in blue and red.