20w 12Vdc LED Power Converter With 6 Way Distributor

A LED driver to power up captivating and stunning LED lights LED lights are gaining popularity because of their many benefits. It’s more energy-efficient and eco-friendly than fluorescent and incandescent lights. Plus, its brightness is far superior to others. So, if you plan to replace your old bulbs and enhance your home with LEDs, you should know that most of them run at a lower voltage, and you’ll need an LED light power converter to make them work. Well, you don’t have to worry because we have what you need! Our LED light power converter has a fast fit plug-in system that allows the connection of compatible lights into a pre-wired distribution block on the 12V side of the unit. It has a 220-240v input voltage and has 6 ports. This LED light power converter can power up to 20w maximum, meaning you can light multiple LEDs in one 20w power converter as long as the total power consumption of the lights is within that limit. If you plan on using more lights and the wattage exceeds the said limit, you can always get more power converters to make them run! Our LED light power converter has a 1-metre pre-wired mains cable. But if you find that the 1-metre cable is not enough, we have a plug and play extension cable that you can use for any single-coloured cabinet lights and LED tapes . With this, you have more freedom to place your LEDs wherever you want. This LED light power converter is a rocker switch type, meaning you have multiple ways of switching it on and off. You can put a plug at the end of the LED power converter and plug it into a socket, or you can have the LED power converter wired directly into the mains lighting circuit and control it using a regular light switch on the wall. We offer a 1-year warranty for this LED light power converter so you can enjoy a bright home without any worries.

20W 12V DC LED DRIVER. Converts 220-240V mains to 12V DC for compatible LED cabinet lights and LED tape. It runs up to 20W of lights in total, so add up the wattage of your lights and keep the total within 20W before you connect them. 6 WAY PLUG-IN DISTRIBUTOR. A pre-wired distribution block on the 12V side with 6 fast-fit ports, so you can plug in up to 6 compatible lights with no extra wiring. It suits 12V lights only, so check the voltage of each light before you buy. 1-METRE MAINS CABLE. Fit a plug to the end of the 1-metre mains cable and use a socket, or have it wired into the mains lighting circuit and use a normal wall switch. Use a qualified electrician for any wiring into the mains circuit. SLIMLINE 147 X 44 X 23MM. A slim driver that is easy to tuck away on top of a wall unit or inside a cabinet. Rated IP20 for dry indoor areas only. Non-dimmable, so use it with a standard on/off switch rather than with a dimmer. SPLIT LARGER LOADS. If the total wattage of your lights goes over 20W, split them across a second driver. Plug each light into a port on the distributor, then fit a plug to the mains cable or have it connected to the lighting circuit.