22mm x 28mm Reducing Tee End Feed PACK of 5
Featured
|
£ 15.69 |
To Shop
|
| COMPARE ALL WEBSHOPS (1) | ||
Description
Amazon
This listing is for a Pack of 5 These fittings are relatively easy to install and require minimal preparation. They typically involve cleaning the pipe end, applying flux, and soldering the fitting onto the pipe, creating a strong and permanent bond. To prepare copper pipe for end feed fittings, cut it square, deburr the edges, clean the pipe end and fitting socket to bright metal with an abrasive pad, and apply a thin layer of flux before assembly. To solder an end feed fitting, clean and flux the joint, assemble it, heat the copper evenly with a blowtorch until it reaches melting temperature, and apply solder wire to the socket edge so capillary action draws the molten metal into the gap around the entire pipe. WRAS Approved
Compare webshops (1)
Description
(1)
This listing is for a Pack of 5 These fittings are relatively easy to install and require minimal preparation. They typically involve cleaning the pipe end, applying flux, and soldering the fitting onto the pipe, creating a strong and permanent bond. To prepare copper pipe for end feed fittings, cut it square, deburr the edges, clean the pipe end and fitting socket to bright metal with an abrasive pad, and apply a thin layer of flux before assembly. To solder an end feed fitting, clean and flux the joint, assemble it, heat the copper evenly with a blowtorch until it reaches melting temperature, and apply solder wire to the socket edge so capillary action draws the molten metal into the gap around the entire pipe. WRAS Approved
Product specifications
Related results
