2X PCIe 6 Pin Male to 8 (6+2) PCI Express Power Adapter Cable for Graphics Video Card ASUS, ASRock, Gigabyte, Radeon, Sapphire, NVIDIA Tesla GPU, etc CPU Breakout Board Mining

🔹 CONVERT 6-PIN TO 8-PIN (6+2) – POWER YOUR GPU WITHOUT UPGRADING PSU Transform a standard 6-pin PCIe power output from your power supply into an 8-pin (6+2) PCIe male connector for your graphics card. Perfect for powering modern GPUs that require 8-pin power connections when your PSU only has 6-pin ports available. The 6+2 design allows you to use it as either a 6-pin or 8-pin connector by sliding the extra 2-pin section on or off. 🔹 COMPATIBLE WITH COOLER MASTER & THERMALTAKE PSUs – PLUS UNIVERSAL 6-PIN STANDARD Specifically tested and verified to work with Cooler Master and Thermaltake power supplies that feature standard 6-pin PCIe ports. Also compatible with any other power supply brand that uses the industry-standard 6-pin PCIe connector pinout (e.g., EVGA, Corsair, Seasonic, Antec – but please verify your PSU‘s pinout before use). The 6-pin male connector follows the standard PCIe specification. 🔹 2-PACK INCLUDED – POWER MULTIPLE GPUs OR DUAL-PORT CARDS Each kit includes two (2) adapter cables, allowing you to power two separate graphics cards or a single high-end GPU that requires dual 8-pin power connections. A cost-effective solution without upgrading your entire power supply. 🔹 PREMIUM 18AWG CONSTRUCTION – SAFE & RELIABLE POWER DELIVERY Built with high-quality 18AWG tinned copper wire for stable power delivery and minimal voltage drop. Each cable is factory-tested to ensure reliable performance under load. The 20-inch (51cm) length provides ample reach for routing inside mid-tower and full-tower cases. 🔹 UNIVERSAL GPU COMPATIBILITY – WORKS WITH WIDE RANGE OF GRAPHICS CARDS The 8-pin (6+2) male end works with graphics cards from all major manufacturers, including: ASUS, ASRock, Gigabyte – Gaming and workstation GPUs Radeon, Sapphire – AMD-based graphics cards NVIDIA Tesla – Data center and compute GPUs NVIDIA RTX / GTX series, AMD RX series 🔹 OPTIMAL 20-INCH (51CM) CABLE LENGTH Total length of 20 inches (51cm) provides enough reach for routing from your PSU to the graphics card with slack for clean cable management, without excessive excess that clutters your case. 🔹 ⚠️ CRITICAL INSTALLATION & SAFETY WARNINGS Power Budget Warning: This adapter does not create additional power – it shares power from the source 6-pin connector. Ensure your PSU has sufficient total wattage for your GPU. Secure Connections: Always push connectors firmly until they click into place. Loose connections can cause overheating or component damage. Do NOT reverse the connection: The 6-pin male end must be plugged into the PSU‘s PCIe cable, and the 8-pin (6+2) end must be plugged into the graphics card. The two ends are not interchangeable. 🔹 ⚠️ ATTENTION: this cable is NOT compatible with EVGA, Corsair, Thermaltake toughpower and Antec PSUs and other power supplies !!!!!