300g Glass Etch Paste Kit, Etching for Creates a Variety of Beautiful Designs on Surfaces, is Suitable Windows, Cups and Other Surfaces

Etch Paste for Glass: Glass etch paste can create a variety of exquisIte pattern designs on the glass surface; etch paste is through a slight corrosion of the glass surface, leaving an unchangeable frosted glass effect, can be used for a variety of glass pattern production. Perfect for DIY Crafts: Glass etching paste designed for diy arts and crafts enthusiasts, you can do it yourself at home to make your home mirrors, glass windows, glass cups can easily be turned into amazing works of art! Steps to Use: 1. Clean the glass surface; 2. Stick the template with hollowing pattern on the glass surface, and seal all the surfaces that don't need the etch paste with adhesive tape; 3. Apply the etch paste (you need to mix the etch paste evenly before use): use a brush or sponge to apply the etch paste evenly on the glass surface; 4. Wait for 3-5 minutes; 5. Rinse: wait 5 minutes, rinse the glass surface thoroughly with water to remove all the residues; 6. Finish Tip: 1. Some high-quality glass with high boron and silicon content takes a longer time, even without leaving any traces; 2. You need to wear acid-resistant gloves; 3. It is advisable to operate in a ventilated environment; 4. If accidentally splashed into the eyes, please wash with water immediately; 5. The etch paste for glass should be sealed and stored when not in use Attention: 1. glass etch paste will not be full of bottles(but the weight of the product is sufficient), because to prevent air pressure problems lead to liquid leakage; 2. due to air pressure and temperature problems may have small crystals, this time you can soak the entire jar in hot water (note that not to the inside of the heating water) for proper heating, heating process, stirring, the crystals will be able to dissolve, defrosting does not affect the normal use of the product!