ODSUPPLIES

35mm x 28mm Endfeed Reducing Tee

Name: 35mm x 28mm Endfeed Reducing Tee
Brand: ODSUPPLIES
SKU: c2d9f1587b28ee7c00020c7fc58fa626

1/1

Image of 35mm x 28mm Endfeed Reducing Tee

Amazon Marketplace

Prices from

9.77

Description

Amazon This listing is for a Pack of 1 Please note that a reducing tee is measured as follows with the tee facing up: 1st stated measurement is Left, 2nd stated measurement is right, 3rd stated measurement is facing up To prepare copper pipe for end feed fittings, cut it square, deburr the edges, clean the pipe end and fitting socket to bright metal with an abrasive pad, and apply a thin layer of flux before assembly. To solder an end feed fitting, clean and flux the joint, assemble it, heat the copper evenly with a blowtorch until it reaches melting temperature, and apply solder wire to the socket edge so capillary action draws the molten metal into the gap around the entire pipe. WRAS Approved

Compare webshops (2)

Sponsored links · Some shops pay us a fee

Sort by:

£ 9.77

Description (1)

This listing is for a Pack of 1 Please note that a reducing tee is measured as follows with the tee facing up: 1st stated measurement is Left, 2nd stated measurement is right, 3rd stated measurement is facing up To prepare copper pipe for end feed fittings, cut it square, deburr the edges, clean the pipe end and fitting socket to bright metal with an abrasive pad, and apply a thin layer of flux before assembly. To solder an end feed fitting, clean and flux the joint, assemble it, heat the copper evenly with a blowtorch until it reaches melting temperature, and apply solder wire to the socket edge so capillary action draws the molten metal into the gap around the entire pipe. WRAS Approved