AP Automotive

38mm 1 1/2" ID Silicone Straight Hose Joiner Coupler 100mm Length Black

Name: 38mm 1 1/2 ID Silicone Straight Hose Joiner Coupler 100mm Length Black
Brand: AP Automotive
SKU: 1246945e8b6ace7ad7b1ce907eda131c

1/1

Image of 38mm 1 1/2" ID Silicone Straight Hose Joiner Coupler 100mm Length Black

Amazon

Prices from

9.75

Description

Amazon 📏 38mm (1 1/2") ID x 100mm STRAIGHT COUPLER - 38mm internal diameter, 4.5mm wall and 47mm Outside Diameter (OD). The 100mm length bridges small gaps between pipes. Push it over two 38mm pipes or spigots of the same size to make a sealed inline joint. 🔧 BUILT FOR COOLANT & RADIATOR PIPEWORK - at 38mm bore it suits radiator and heater hoses, coolant rails, water pump and thermostat housing joints, on cars, vans, motorbikes, 4x4s, trucks, tractors, plant and industrial machinery. 🌡️ HIGH TEMPERATURE SILICONE -60°C to +180°C - stays flexible through extreme heat and cold and resists ozone, UV and moisture, so it will not harden, crack or perish the way ageing rubber hose does. 🛡️ 3-PLY POLYESTER REINFORCED - 3 layers of polyester fabric inside a 4.5mm silicone wall hold the 38mm bore round under boost pressure and vacuum, with a smooth inner surface for clean airflow and coolant flow. ⚫ BLACK GLOSS FINISH - a smart black silicone joiner for a tidy engine bay. Cut with a sharp blade for a shorter joint, and secure each end with a hose clip sized for the 47mm Outside Diameter (OD). Also available in blue and red.

Compare webshops (2)

Sponsored links · Some shops pay us a fee

Sort by:

£ 9.75

Description (1)

📏 38mm (1 1/2") ID x 100mm STRAIGHT COUPLER - 38mm internal diameter, 4.5mm wall and 47mm Outside Diameter (OD). The 100mm length bridges small gaps between pipes. Push it over two 38mm pipes or spigots of the same size to make a sealed inline joint. 🔧 BUILT FOR COOLANT & RADIATOR PIPEWORK - at 38mm bore it suits radiator and heater hoses, coolant rails, water pump and thermostat housing joints, on cars, vans, motorbikes, 4x4s, trucks, tractors, plant and industrial machinery. 🌡️ HIGH TEMPERATURE SILICONE -60°C to +180°C - stays flexible through extreme heat and cold and resists ozone, UV and moisture, so it will not harden, crack or perish the way ageing rubber hose does. 🛡️ 3-PLY POLYESTER REINFORCED - 3 layers of polyester fabric inside a 4.5mm silicone wall hold the 38mm bore round under boost pressure and vacuum, with a smooth inner surface for clean airflow and coolant flow. ⚫ BLACK GLOSS FINISH - a smart black silicone joiner for a tidy engine bay. Cut with a sharp blade for a shorter joint, and secure each end with a hose clip sized for the 47mm Outside Diameter (OD). Also available in blue and red.