AP Automotive

38mm 1 1/2" ID Silicone Straight Hose Joiner Coupler 200mm Length Red

Name: 38mm 1 1/2 ID Silicone Straight Hose Joiner Coupler 200mm Length Red
Brand: AP Automotive
SKU: efb1426170cb042ce5407d89118c9bf1

1/1

Image of 38mm 1 1/2" ID Silicone Straight Hose Joiner Coupler 200mm Length Red

Amazon

Prices from

11.75

Description

Amazon 📏 38mm (1 1/2") ID x 200mm STRAIGHT COUPLER - 38mm internal diameter, 4.5mm wall and 47mm Outside Diameter (OD). The 200mm length bridges small gaps between pipes. Push it over two 38mm pipes or spigots of the same size to make a sealed inline joint. 🔧 BUILT FOR COOLANT & RADIATOR PIPEWORK - at 38mm bore it suits radiator and heater hoses, coolant rails, water pump and thermostat housing joints, on cars, vans, motorbikes, 4x4s, trucks, tractors, plant and industrial machinery. 🌡️ HIGH TEMPERATURE SILICONE -60°C to +180°C - stays flexible through extreme heat and cold and resists ozone, UV and moisture, so it will not harden, crack or perish the way ageing rubber hose does. 🛡️ 3-PLY POLYESTER REINFORCED - 3 layers of polyester fabric inside a 4.5mm silicone wall hold the 38mm bore round under boost pressure and vacuum, with a smooth inner surface for clean airflow and coolant flow. 🔴 RED GLOSS FINISH - a smart red silicone joiner for a tidy engine bay. Cut with a sharp blade for a shorter joint, and secure each end with a hose clip sized for the 47mm Outside Diameter (OD). Also available in blue and black.

Compare webshops (2)

Sponsored links · Some shops pay us a fee

Sort by:

£ 11.75

Description (1)

📏 38mm (1 1/2") ID x 200mm STRAIGHT COUPLER - 38mm internal diameter, 4.5mm wall and 47mm Outside Diameter (OD). The 200mm length bridges small gaps between pipes. Push it over two 38mm pipes or spigots of the same size to make a sealed inline joint. 🔧 BUILT FOR COOLANT & RADIATOR PIPEWORK - at 38mm bore it suits radiator and heater hoses, coolant rails, water pump and thermostat housing joints, on cars, vans, motorbikes, 4x4s, trucks, tractors, plant and industrial machinery. 🌡️ HIGH TEMPERATURE SILICONE -60°C to +180°C - stays flexible through extreme heat and cold and resists ozone, UV and moisture, so it will not harden, crack or perish the way ageing rubber hose does. 🛡️ 3-PLY POLYESTER REINFORCED - 3 layers of polyester fabric inside a 4.5mm silicone wall hold the 38mm bore round under boost pressure and vacuum, with a smooth inner surface for clean airflow and coolant flow. 🔴 RED GLOSS FINISH - a smart red silicone joiner for a tidy engine bay. Cut with a sharp blade for a shorter joint, and secure each end with a hose clip sized for the 47mm Outside Diameter (OD). Also available in blue and black.