4mm ID 30 Metre Length PVC Tube Clear Plastic Hose

📏 4MM BORE x 30 METRES - 4mm (5/32") internal diameter (ID), 6mm Outside Diameter (OD), 1mm wall, 30 metres (98.4ft): a full 30 metre coil for long runs with the fewest joins. Match the internal diameter to the outside diameter of the barb or spigot it pushes onto for a firm, snug fit. 🔧 GENERAL PURPOSE CLEAR TUBE - Handles water, air and light chemical transfer around the home, garden and workshop, from pump and filter connections to drain lines, level indicators and DIY projects. At this small bore it suits air lines, dispensers, level indicators and small barbs. 💧 CRYSTAL CLEAR, SMOOTH BORE - See flow, air locks and blockages at a glance, with low flow resistance through the smooth bore. The full 30 metre coil is the best value per metre and leaves plenty for spares; if it holds the coil shape, a few minutes in warm water relaxes it. 🌡️ −10 °C TO +65 °C (PEAK +70 °C) - Stays flexible in cold sheds and warm plant rooms. The 4mm bore is rated 1.5 bar working and 4.5 bar burst and bends to a 24mm radius before it starts to kink. This is unreinforced tube for gravity, syphon and low-pressure pump work. ✅ WATER, AIR AND LIGHT CHEMICALS - Carries water, air, drinks and dilute chemical solutions. Non-toxic and BPA-free, made to GB/T 13527.1-92. Not for fuel, oil, gas, hot water or steam, or mains or pressure washer pressure - use a reinforced hose for those. Where a joint needs securing, use a hose clip whose range includes 6mm.