51mm ID Red 135 Degree Silicone Elbow Hose - AutoSiliconeHoses

📏 51mm (2") INTERNAL DIAMETER (ID) 135 DEGREE SILICONE ELBOW - 5.5mm wall and an Outside Diameter (OD) of 62mm. 100mm long on each leg, so there is room to trim either end to fit. Match the ID to the outside of the pipe or outlet it pushes onto. 🔧 SWEEPING 135 DEGREE BEND - A moulded 135 degree elbow makes a wide, sweeping turn that straight hose cannot hold on its own. Typical uses at this size: turbo outlet and intercooler pipework, larger radiator hoses, and induction kits. For air, water and coolant; not suitable for fuel or oil (choose our Fluoro Lined fuel and oil hose for those). 🌡️ -50°C TO +250°C OPERATING RANGE - Rated -50°C to +250°C, so it copes on the hot side of a turbo system and on the main coolant circuit. Working pressure 4.5 bar, burst pressure 13.5 bar (3:1 safety factor). Bend radius 51mm. 🛡️ SAE J20 R3, 4 PLY POLYESTER REINFORCED - Smooth extruded silicone inner with 4 layers of polyester fabric in the 5.5mm wall, so it holds its shape under pressure and resists swelling. The silicone resists ozone, UV light, weathering and ageing, so it lasts outdoors and in the engine bay without perishing. 🔴 RED - FITTING TIP - Push the hose fully onto the pipe, then use hose clips whose range covers about 62mm (the Outside Diameter). Red silicone gives a bold race-style look that makes joints and clips easy to check. Also available in other colours and sizes.