AP Automotive

6mm ID Silicone 2 Ply Heater Radiator Hose Metre Length Red

Name: 6mm ID Silicone 2 Ply Heater Radiator Hose Metre Length Red
Brand: AP Automotive
SKU: 1949293d7e45d31fdbd7a55e9202dc2a

1/1

Image of 6mm ID Silicone 2 Ply Heater Radiator Hose Metre Length Red

Amazon Marketplace

Prices from

15.75

Description

Amazon 📏 6MM (1/4") BORE, 2M LENGTH – 6mm internal diameter, 14mm outside diameter and 4mm wall, supplied as one continuous 2 metre length (6.6ft, approx. 0.31 kg), ideal for a short repair or a single bypass line. 🔧 SILICONE HEATER AND RADIATOR HOSE – for cars, vans, motorbikes, classics and kit cars. The 6mm bore suits heater bypass, overflow, breather, vacuum and small coolant bleed lines. 🛡️ 2-PLY POLYESTER REINFORCED – smooth extruded silicone inner, 2-ply polyester braid and a silicone outer layer, made to SAE J20 R3. Resists ozone, ageing, cracking and coolant additives far longer than rubber. Trim the length with a sharp blade for a square, leak-free end. 🌡️ -30°C TO +200°C RATED – continuous operating range -30°C to +200°C with peaks to +220°C. This 6mm bore is rated 8 bar working and 24 bar burst pressure, with a 70mm minimum bend radius. 🔴 RED SILICONE – red finish that keeps its colour under bonnet heat. For coolant, water and air only – not suitable for fuel or oil. Use hose clips sized for the 14mm outside diameter.

Compare webshops (2)

Sponsored links · Some shops pay us a fee

Sort by:

£ 15.75

Description (1)

📏 6MM (1/4") BORE, 2M LENGTH – 6mm internal diameter, 14mm outside diameter and 4mm wall, supplied as one continuous 2 metre length (6.6ft, approx. 0.31 kg), ideal for a short repair or a single bypass line. 🔧 SILICONE HEATER AND RADIATOR HOSE – for cars, vans, motorbikes, classics and kit cars. The 6mm bore suits heater bypass, overflow, breather, vacuum and small coolant bleed lines. 🛡️ 2-PLY POLYESTER REINFORCED – smooth extruded silicone inner, 2-ply polyester braid and a silicone outer layer, made to SAE J20 R3. Resists ozone, ageing, cracking and coolant additives far longer than rubber. Trim the length with a sharp blade for a square, leak-free end. 🌡️ -30°C TO +200°C RATED – continuous operating range -30°C to +200°C with peaks to +220°C. This 6mm bore is rated 8 bar working and 24 bar burst pressure, with a 70mm minimum bend radius. 🔴 RED SILICONE – red finish that keeps its colour under bonnet heat. For coolant, water and air only – not suitable for fuel or oil. Use hose clips sized for the 14mm outside diameter.