6mm x 11mm Red Silicone Vacuum Tubing Rubber Hose Air Water 4 Metre

📏 6MM ID x 11MM OD, 4M LENGTH – 6mm (15/64") internal diameter, 11mm (7/16") outside diameter and 2.5mm wall, supplied as one continuous 4 metre length (13.1ft, approx. 144g). Choose the ID that matches the spigot you are fitting to. 🔧 MULTI-PURPOSE SILICONE TUBING – for cars, vans, motorbikes, boats and machinery. The 6mm bore suits vacuum and breather lines, washer jet feeds, coolant overflow and emission (EVAP / EGR) control pipes; also ideal for workshop air lines and low-pressure water transfer. 🌡️ -60°C TO +180°C RATED – continuous operating range -60°C to +180°C with peaks to +200°C. Extruded VMQ silicone to SAE J20 R3 grade stays flexible from cold starts to full engine-bay heat and will not harden, crack or perish like rubber. 🛠️ UNREINFORCED, EASY TO ROUTE – a single wall of silicone with no fabric ply, so it bends round tight routes and seals well on push-on spigots. Made for vacuum, signal, air and low-pressure water lines – not for pressurised coolant, fuel or oil; very tight bends can kink. 🔴 RED SILICONE – bright red finish for race bays and easy line tracing. Trim square with a sharp blade and secure with mini hose clips sized for the 11mm outside diameter.