Ajulube100 ml

Ajulube oil is advisable in an type of gearbox and generally whenever a lubricant provided with EP characteristics is required. Ajulube can be used in the following gear types: - Circular gears - Helical gears - Conical gears - Industrial hypoid gears - Worm gears Ajulube oil is suitable in bearings lubricated by centralized systems, bath or circulation. It can also be used in friction bearings. This oil is most advisable in transmission components such as reducers, regulators and gearboxes under heavy loads and severe operating conditions. This product is recommended whenever it is worth reducing the oil temperature in normal working conditions, or whenever a significant noise reduction is needed. Ajulube belongs to the “third generation” of lubricants. Such lubricants do not build an hydrodynamic film from the chemical reaction as the first generation did. Neither has it provided a micro surface sealing film as the second generation did. The third generation lubricant belongs to a recent technology as far as additives are concerned. Such additive package acts on the first molecular layers of the metallic surface suffering a plastic strain from the very beginning. Improved useful life of the oil When the temperature of the oil decreases. the life span is improved. The shelf life of a given gearbox oil usually depends a lot on the mechanical design of the element as well as on the regime of work power, in relation to the work-maximum nominal power of the reducer or regulator. This is the reason why a generic value cannot be specifically established in terms of shelf life. Thus, each case must be studied separately. By improving the useful life, Ajulube will reduce the maintenance costs. Noise reduction The noise produced by the machine is reduced significantly when reducing the friction and when a “soft” surface micro layer in the surface of attack is provided. The special rheology of this product also cooperates to reduce noise, that is, its flow properties, which remain within the category of Newtonian fluids with viscosity behavior kinematics-energy applied very favorable for use as gear oils. The special fluidity properties of the product will help to reduce the noise, too. The mechanical noise can be reduced from 15 to 50% vs the conventional EP oils. This percentage depends on the type, on the design of the equipment and on the power - work - maximun nominal power of eacj equipment. In addition to these properties, we point out the following ones: - Very high anti-wear capacity. - High thermal stability. - Optimum anticorrosive protection (steel and bronze). - Full compatibility with other mineral base oils, so it is not necessary to clean the gearboxes before changing to Ajulube. - Reduces roughness and pitting in the gear teething. - Ajulube oil does not contain lead.