Akozon DC12V Soil Moisture Sensor Relay Control Module Meter Automatic Watering Switch for Arduino Garden Plant Care System

Control Threshold: This Soil Moisture Sensor module can control humidity of soil in a wide range and set control threshold by adjusting potentiometer. When humidity is lower than the set value, relay is energized; when humidity is higher than the set value, relay is dis-energized. High quality: High quality soil moisture sensor has nickel plating surface, widened induction area, can improve conductive performance and prevent rust problem when contact with the soil to prolong service life. Time Delay Function: The Soil Hygrometer Detection has time delay function, delay 3-5 seconds, when humidity is detected in the threshold state, the relay will not flicker. Automatically Watering: Adjusting soil moisture control threshold by potentiometer (clockwise to increase, counterclockwise to reduce), it can control soil humidity and automatically watering vegetable garden, flower garden or pot. Adjusted As Required: Because this Soil Hygrometer Sensor Test Kit module has time delay function, when adjusting humidity, you need to wait for 5 to 8 seconds to check the change of relay, and the green LED lights will change, until it is adjusted as required., Weight: 0.0440924524 Pounds, Manufacturer: Xinrub