Akozon Digital Readout Kit, 0 300mm Accurate Linear Scale LCD Kit for Milling Machines Lathes

Performance upgrade: Dynamic grid module displacement sensor, novel design, strong anti-jamming ability; Fast response speed (3m/s), no overspeed error fault occurred; Inch, fraction and metric reading; USB digital input terminal, compared with the original SPC interface is more No rack, pinion or glass scale, linear scale safely embedded in lightweight aluminum scale Convenient to use: The drawer type battery compartment is designed to replace the battery more conveniently; the mounting hole is located on the back of the sensor, and it is fixed when machining or machine tooling is installed. There are mounting holes on the back of the sensor for measuring and positioning the assembly fixed on the fixture during machining or machine assembly tooling, and ensuring that the sensor can be used with a variety of machine tools Memory function: One end of the wire is welded to the electronic ruler, the other end is connected to the USB cable connector and the monitor;If it is not used for a long time, the sensor will be automatically turned off; when the caliper is turned on at the same measurement coordinates (without changing the stroke of the caliper), it will remember the value of the coordinate before the automatic closing Uses: Fixed measurement can be performed at any position of vertical , horizontal or any mounting hardware with the Digital Readout Kit. It is used to equip and upgrade old lathes with various industrial lathes. Zero can be set anywhere in the operating range to determine the relative distance Function: This digital readout kit can be mounted on various woodworking and metalworking machines for conversion to digital readings. 5 Function buttons: ON/OFF, mm/in, ZERO, ABS, SET. External LCD display for remote reading and The magnet on the back of the monitor can be adsorbed on iron products,which make it more convenient to use. It uses 3V CR2032 lithium battery and lasts longer