ALBATROSS ALBA-COMBI ANALOG DATA CONVERTER TO NMEA2000

Albatross Alba Combi Nmea2000 Converter. Transform your boat´s data into NMEA2000® with the ALBATROSS Alba Combi Converter. This powerful, NMEA2000® certified device seamlessly converts analogue engine data, tank levels, alarms, pressure, and temperature from various sensors into digital signals. Enjoy effortless, web-based PC configuration and calibration with no special tools required. Monitor your vessel´s vital signs anytime, anywhere, from any internet-connected device, and customize your own monitoring interface with embedded web server functionality. Featuring versatile analogue inputs for resistance, voltage, RPM, and temperature, the Alba Combi precisely translates your boat´s parameters, ensuring you have complete control and awareness. Alba-Combi Engine Monitoring 15 PGN - Analog to NMEA 2000 Signal Converter.Translate analogue signals from all over the boat to an NMEA2000 ®.Features:- NMEA 2000 Certified ProductThe unit was recognized officially by NME2000®The new AlbaCombi is a second generation device, built following our successful Alba line of converters, that translate analogue signals from all over the boat to an NMEA2000 bus. The AlbaCombi can be used to get engine data, tank levels, alarm status, generic pressure and temperature indications from any 4-20mA sensor.- Configuration and setup from PC and without any calibration toolsThe AlbaCombi has an Ethernet port that will allow web based calibration. Just connect your laptop to the AlbaCombi via Ethernet and you will get to the calibration and testing page. No calibration tools or special interfaces are required. This device is future proof and can be upgraded in the field via its Ethernet port.- Monitor all boat parameters anytime anywhereWith AlbaCombi you can monitor engine data, tank levels, alarm status, generic pressure and temperature not only from any multifunction display but also from any smartphone or personal device with an Internet connection.- Customize your monitoring interfaceThe Alba-Combi has an embedded monitoring web server that will allow to create a full monitoring display with analogue or digital gauges to be displayed in PC, Mac, iOS or Android devices. Whether it's onboard via WiFi or ashore via an Internet connection, you can see what is happening aboard your vessel.- PowerfulWith the AlbaCombi you get twelve 0V to 32V inputs that can be used for anything from reading voltages of batteries to interfacing with any analogue gauges. Six channels can be configured to measure resistance from any industry standard engine sensor. Also there are two RPM inputs, one PTC temperature input, one shunt and two relay outputs.- PreciseAll twelve resistance and voltage channels have comprehensive calibration that allow you to create an 8 point calibration table or select a predefined industry standard calibration table for most common sensors and gauges.- CapableSatisfy the most demanding applications. The isolated NMEA2000 port will feed all the converted data into a NMEA2000 network.- VersatileThe AlbaCombi can be used to get engine data, tank levels, generic pressure and temperature from any resistive, voltage or 4-20mA sensor (additional resistor needed)Specifications:- Tension: .......................9-18V DC from the NMEA2000 bus- Consumption................150mA- Equivalent load.............3 LEN as per NMEA2000- Size...............................104mmx86mmx588mm- Weight...........................230g- Mounting.......................DIN Rail Clip EN 50.022- Case material...............Top PC/UL 94-V0, Base PPO/UL 94-V0- Protection Class...........IP20- Working temperature....-15ºC to +55ºC- Storage temperature.....-25ºC to +85ºC- Analogue Inputs:6 x Resistive (0 to 600 Ohm) or Voltage (0-32V)6 x Voltage (0-32V)2 x RPM W signal or magnetic sensor 1 x Precision temperature PTC10001 x 100Mv current Shunt- Analogue Input precision...... 1% or better- Relay out.............................. 2 x Open collector output- Data in/out: Ethernet port (calibration and monitoring)RS232 (module programming)Isolated CAN NMEA2000- Periodic:PGN 127488 - Engine Parameters, Rapid UpdatePGN 127489 - Engine Parameters, DynamicPGN 127493 - Transmission Parameters, DynamicPGN 127505 - Fluid LevelPGN 127508 - Battery StatusPGN 130314 - PressurePGN 130316 - Temperature, Extended RangePGN 130576 - Trim Tab StatusInstructions of use:The problem appears when you put the unit in setup mode (Switch nº2 in OFF position) in Chrome browser. How to recover the unit:First of all, install Mozilla Firefox.Connect the unit to your computer and confirm the ip configuration is correct.1) Get inside in Firefox browser in the url: 192.168.0.50 2) Confirm unit is in setup mode Switch nº1: ONSwitch nº2: OFFAnd press RESET button3) In Firefox, press button update the firmware. You should download from the following link:http://www.albacombi.com/wp-content/uploads/2016/09/FirmwareAC_2_0.zip 4) Decompress the .zip and press browse button in Chrome, select the file ended in .xin and Upload.5) Press Upload, wait around 10 seconds and wait to receive the upload confirmation message: Firmware upload succeeded6) Turn both switches in ON position Switch nº1: ONSwitch nº2: ONAnd press RESET button7) Refresh Firefox browser and wait some seconds the unit should work again. With the unit recovered and both switches ON the unit works in Firefox and Chrome. But in setup mode only works in Firefox. tradeinn Waveinn

Alba-Combi gives you twelve inputs between 0V and 32V that can be used for what you need, from a reading of the battery voltage to interconnecting with any analog meter Alba-Combi can be used to obtain engine data, tank level, alarm status, generic pressure and temperature indications from any 4-20mA sensor The twelve resistance and voltage channels are with an extensive calibration system allowing it to create an 8-point calibration table