ANCKNEG 5 Pack 14 Inch Chainsaw Chain 3/8" LP .050" 52DL Low-Kickback Semi-Chisel Cutters, Compatible with Husqvarna 120, Echo CS-310, Ryobi RY3714

【Confirm Key Specifications Before Ordering】This chain is intended for 14-inch guide bars requiring 52 drive links, 3/8" low-profile pitch, and .050" gauge. These three specifications are the key points to verify for fit; the chainsaw model name alone may not be sufficient. Please check your original chain's drive link count, pitch and gauge before purchase. Pack of 5. 【Low-Kickback Semi-Chisel for Controlled Cutting】Semi-chisel cutters with a low-kickback profile help reduce vibration and kickback tendency during limbing, bucking and general yard work. Hardened rivets and heat-treated links help maintain cutter geometry through repeated use, so the chain may hold its edge longer between sharpenings. 【Replacement Loop, Standard Installation】Remove the worn loop, route the new chain around the bar nose sprocket, and adjust tension before use. The 52DL loop is intended for standard 14-inch bars requiring 52 drive links; spacers or adapters are typically not required, but please confirm your bar setup. Rotating among the five chains in the pack can help reduce downtime and extend total service life. 【Designed for ANSI B175.1 Low-Kickback Performance】This saw chain is designed to meet the kickback performance requirement of ANSI B175.1 when tested on a representative sample of chainsaws. Low-kickback chain is one of the devices recognized under the standard to help reduce kickback injury risk on smaller-displacement saws. Before first use, match the chain to the bar nose sprocket and check tension. 【Five-Chain Value, Fewer Reorders】Five identical 52DL loops per pack mean you can keep a sharp chain on the saw while others are cleaned, sharpened or set aside. Suitable for clean wood, limbing and light storm cleanup. Store spare chains lightly oiled to help protect against surface corrosion.