AnyCubic Wash & Cure 3 Plus 2-in-1 Resin Post-Processing Station

Speed up the post-processing of your 3D prints by using the Wash & Cure 3 Plus from Anycubic. This Wash & Cure machine has a larger capacity than previous Anycubic Wash & Cure machines. It has a large capacity of 7.6 liters and can wash and cure a 3D print of up to 228 x 128 x 260 mm. It is possible to clean the 3D print by placing it in the supplied basket or by hanging it from the top.Higher qualityThe design uses an innovative Flexicure light with a gooseneck, which increases the energy value by 30,000 W/cm2. This results in improved curing in crucial areas, such as the top of your print and other hard-to-reach parts. The Wash & Cure 3 Plus uses a new setup, which cures 3D prints 20% more uniformly. This allows for more precise curing, resulting in greater consistency and higher quality.Efficient & fastThe basket in which you can place your 3D model for cleaning is made of double-layer PP and supports washing parts with the build plate. In addition, you will never have problems with rust on the basket, because this material is rust-free. The basket comes with two heights at which you can adjust it: 150 mm and 250 mm. This allows the cleaning alcohol to be used more efficiently. The new two-layer curing platform also gives the option to cure a larger number of smaller 3D prints at once. This will speed up your 3D printing process significantly.User friendlyBoth washing and curing can be easily selected. The goose neck light can also be turned on or off with just one click. The washing and curing time can be set between 1 and 30 minutes. The design is designed to operate more quietly, creating a comfortable working environment.

Elevate your 3D printing workflow to a new level of professionalism and convenience with the ANYCUBIC x JOYBUY Wash & Cure 3 Station. This all-in-one solution streamlines the essential post-processing steps, transforming messy manual cleaning and uneven curing into a safe, automated, and remarkably efficient process.The powerful washing system features a magnetic drive impeller that creates a strong vortex water flow, thoroughly scrubbing away every trace of uncured resin from even the most intricate models. With a generous 165×100×180mm cleaning capacity, it effortlessly handles most standard prints. The integrated 360° rotating curing turntable then ensures your creations are exposed to uniform, high-intensity 405nm UV light from 36 LEDs, guaranteeing a perfectly solid and stable cure every time.Designed for user safety and ease, the station includes a robust metal lid with a protective viewing window and a built-in timer for precise control over both washing and curing cycles. The ANYCUBIC Wash & Cure 3 is the indispensable finishing touch for any resin 3D printing enthusiast, delivering flawless results and freeing up your valuable time.