AP Automotive

ap automotive Silicone Vacuum Hose 3mm X 1m Black

Name: ap automotive Silicone Vacuum Hose 3mm X 1m Black
Brand: AP Automotive
SKU: bd8222f5bd75f5ff690097e48d13cdce
Price: 7.75 GBP
Availability: InStock

1/1

Image of ap automotive Silicone Vacuum Hose 3mm X 1m Black

Amazon

Prices from

7.75

Description

Amazon 📏 3MM ID x 7MM OD, 1M LENGTH – 3mm (1/8") internal diameter, 7mm (9/32") outside diameter and 2mm wall, supplied as one continuous 1 metre length (3.3ft, approx. 28g). Choose the ID that matches the spigot you are fitting to. 🔧 ENGINE VACUUM LINE – for cars, vans, motorbikes, boats and machinery. The 3mm bore suits MAP sensor and boost-control signal lines, wastegate actuator, dump valve and fuel-pressure-regulator vacuum references; also ideal for workshop air lines and low-pressure water transfer. 🌡️ -60°C TO +180°C RATED – continuous operating range -60°C to +180°C with peaks to +200°C. Extruded VMQ silicone to SAE J20 R3 grade stays flexible from cold starts to full engine-bay heat and will not harden, crack or perish like rubber. 🛠️ UNREINFORCED, EASY TO ROUTE – a single wall of silicone with no fabric ply, so it bends round tight routes and seals well on push-on spigots. Made for vacuum, signal, air and low-pressure water lines – not for pressurised coolant, fuel or oil; very tight bends can kink. ⚫ BLACK SILICONE – black finish that blends in with OEM pipework. Trim square with a sharp blade and secure with mini hose clips sized for the 7mm outside diameter.

Compare webshops (1)

Sponsored links · Some shops pay us a fee

Sort by:

£ 7.75

Description (1)

📏 3MM ID x 7MM OD, 1M LENGTH – 3mm (1/8") internal diameter, 7mm (9/32") outside diameter and 2mm wall, supplied as one continuous 1 metre length (3.3ft, approx. 28g). Choose the ID that matches the spigot you are fitting to. 🔧 ENGINE VACUUM LINE – for cars, vans, motorbikes, boats and machinery. The 3mm bore suits MAP sensor and boost-control signal lines, wastegate actuator, dump valve and fuel-pressure-regulator vacuum references; also ideal for workshop air lines and low-pressure water transfer. 🌡️ -60°C TO +180°C RATED – continuous operating range -60°C to +180°C with peaks to +200°C. Extruded VMQ silicone to SAE J20 R3 grade stays flexible from cold starts to full engine-bay heat and will not harden, crack or perish like rubber. 🛠️ UNREINFORCED, EASY TO ROUTE – a single wall of silicone with no fabric ply, so it bends round tight routes and seals well on push-on spigots. Made for vacuum, signal, air and low-pressure water lines – not for pressurised coolant, fuel or oil; very tight bends can kink. ⚫ BLACK SILICONE – black finish that blends in with OEM pipework. Trim square with a sharp blade and secure with mini hose clips sized for the 7mm outside diameter.