AP Automotive

ap automotive Silicone Vacuum Hose 6mm X 2m Black

Name: ap automotive Silicone Vacuum Hose 6mm X 2m Black
Brand: AP Automotive
SKU: 2e480098f8274fca1af2cc49d8e938cc
Price: 11.75 GBP
Availability: InStock

1/1

Image of ap automotive Silicone Vacuum Hose 6mm X 2m Black

Amazon

Prices from

11.75

Description

Amazon 📏 6MM ID x 11MM OD, 2M LENGTH – 6mm (15/64") internal diameter, 11mm (7/16") outside diameter and 2.5mm wall, supplied as one continuous 2 metre length (6.6ft, approx. 72g). Choose the ID that matches the spigot you are fitting to. 🔧 ENGINE VACUUM LINE – for cars, vans, motorbikes, boats and machinery. The 6mm bore suits vacuum and breather lines, washer jet feeds, coolant overflow and emission (EVAP / EGR) control pipes; also ideal for workshop air lines and low-pressure water transfer. 🌡️ -60°C TO +180°C RATED – continuous operating range -60°C to +180°C with peaks to +200°C. Extruded VMQ silicone to SAE J20 R3 grade stays flexible from cold starts to full engine-bay heat and will not harden, crack or perish like rubber. 🛠️ UNREINFORCED, EASY TO ROUTE – a single wall of silicone with no fabric ply, so it bends round tight routes and seals well on push-on spigots. Made for vacuum, signal, air and low-pressure water lines – not for pressurised coolant, fuel or oil; very tight bends can kink. ⚫ BLACK SILICONE – black finish that blends in with OEM pipework. Trim square with a sharp blade and secure with mini hose clips sized for the 11mm outside diameter.

Compare webshops (1)

Sponsored links · Some shops pay us a fee

Sort by:

£ 11.75

Description (1)

📏 6MM ID x 11MM OD, 2M LENGTH – 6mm (15/64") internal diameter, 11mm (7/16") outside diameter and 2.5mm wall, supplied as one continuous 2 metre length (6.6ft, approx. 72g). Choose the ID that matches the spigot you are fitting to. 🔧 ENGINE VACUUM LINE – for cars, vans, motorbikes, boats and machinery. The 6mm bore suits vacuum and breather lines, washer jet feeds, coolant overflow and emission (EVAP / EGR) control pipes; also ideal for workshop air lines and low-pressure water transfer. 🌡️ -60°C TO +180°C RATED – continuous operating range -60°C to +180°C with peaks to +200°C. Extruded VMQ silicone to SAE J20 R3 grade stays flexible from cold starts to full engine-bay heat and will not harden, crack or perish like rubber. 🛠️ UNREINFORCED, EASY TO ROUTE – a single wall of silicone with no fabric ply, so it bends round tight routes and seals well on push-on spigots. Made for vacuum, signal, air and low-pressure water lines – not for pressurised coolant, fuel or oil; very tight bends can kink. ⚫ BLACK SILICONE – black finish that blends in with OEM pipework. Trim square with a sharp blade and secure with mini hose clips sized for the 11mm outside diameter.