APC Rack PDU 2G AP8886 Power Distribution (Metered, ZeroU, 22 KW (32A) / 17.3KW (24A), 230V, 30 Outlets C13 & 12 C19, IEC 309, 32A)

Apc Ap8886 Power Distribution Unit. EU PlugAPC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection.The output and input connections are (30) C13 & (12) C19, and the cable length is 1.83m.User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads.Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership.Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers.Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.APC NetShelter Metered Rack PDU, 0U, 3PH, 22kW 230V 32A or 17.3kW 230V 24A, x30 C13 and x12 C19 outlets, IEC 309 3P+N+PE cord.PDU types:Metered, Rack capacity:0U, Mounting:Vertical.AC outlets quantity:42 AC outlet(s), AC outlet types:C13 coupler, C19 coupler, Power plug:IEC309.Cable length:1.83 m.Monitoring:Current, Power, Voltage.Nominal input voltage:400 V, Maximum current:32 A, AC input frequency:50 - 60 Hz . tradeinn Techinn

Metered rack Power Distribution Units (PDUs) provide real-time remote monitoring of connected loads User-defined alarms warn of potential circuit overloads before critical IT failures occur Rack-Mountable - Includes horizontal, vertical, and toolless-mount varieties. Puts power where it is needed most - in the racks near the equipment Wide range of input and output connections - Product family includes a variety of input and output connections to distribute 120V, 208V, or 230V power to multiple outlets Single input power source - Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment