Area1 E Mark LED Motorcycle Running Effect Indicator Light Sequential Black Universal Quad ATV IP67 Certification

A set consists of 2 indicators (left and right). The indicators have a power of 1.3 watts at 12 volts The plastic indicators have been manufactured to an extremely high quality and for an extremely stylish effect, the indicator glass has been tinted black. For an improved grip and vibration reduction, the indicator is rubber-mounted on the mounting arm. Thanks to this LED indicator, with a so-called running light effect, your motorcycle will be an absolute eye-catcher even in the dark. They not only enhance your vehicle visually, but also increase your safety, because the sequential LED indicators (so-called running effect) catch the eye of other road users thanks to the special flashing frequency and the brighter LED luminosity. Installation instructions: thread: M8. Thread length: approx. 20 mm (2 cm). Cable length: approx. 20 cm +++ Connection via two cables: indicator + (red) / indicator ground - (black) Note: LED indicators require less power than standard filament indicators. It is possible that you have to replace the original relay with a load-independent LED relay. If the LED indicators light up too quickly or permanently after installation, the original relay must be replaced with an LED relay (see product description below)