Atranvelo Mooveable Dv Rear Stand

Atranvelo Mooveable Dv Rear Stand Silver 24-28´´. Introducing the AtranVelo Mooveable DV rear stand – your practical cycling companion. This versatile kickstand offers effortless installation for bikes with center mount or integrated 18mm DV rear chainstay holes, with a universal mount option available. Its adjustable length accommodates wheels from 24-28 inches, providing perfect support. Easy to install and a joy to use, it´s an essential accessory for any cyclist. Practical kickstand available for bikes with either center mount or integrated 18mm or 40mm mounting holes on the chainstay. We also have a universal mount option. Quick and easy to install. A joy to use. The adjustable length works for bikes with wheels from 24-28 inches.Features:Center Mount:- Center Mount Kickstands attach to a plate between the chainstays near the pedals with an M10 bolt. Tighten the bolt until it feels secure (up to a maximum torque of 47 Nm), but be careful not to apply excessive force. To ensure a smooth and successful installation, be sure to clean all contact surfaces thoroughly before mounting. To prevent the bolt from loosening over time, we recommend applying a locking agent such as Loctite.Center Mount with Bracket: - If your bike doesn't have a mounting plate between the chainstays, you'll need to use a Clamp Alloy adapter to install a kickstand. When attaching the kickstand, be mindful not to overtighten the bolt and potentially damage the chainstays. The optimal torque for the bolt depends on the specific design and strength of the chainstays. As a general rule, tighten the bolt until it feels secure, but don't apply excessive force. If you have any doubts about the installation process, don't hesitate to seek guidance from your local bike shop. To ensure a smooth and successful installation, be sure to clean all contact surfaces thoroughly before mounting. To prevent the bolt from loosening over time, we recommend applying a locking agent such as Loctite.DV (KSA 18) Rear Mount: - Rear kickstands mounts on the chainstay near the center of the rear wheel. Check your bike to see if you need an HV (KSA 40) or DV (KSA 18) mount. The attachment points for DV mounts are narrower than HV. To ensure a smooth and successful installation, clean all contact surfaces thoroughly before mounting. To prevent the bolt from loosening over time, we recommend applying a locking agent such as Loctite.Measure the Distance from Bike Frame to the Ground: - To ensure that a specific kickstand fits your bike, it's best to take a few quick measurements. First, place your bike on a solid surface and lean it slightly to the left (about 6-8°). Then, have a friend help you measure the distance from the attachment points on the frame (located at the center, HV, and DV) to the ground. This measurement will give you the minimum length kickstand that you should consider purchasing. Keep in mind that if you plan to park your bike on soft surfaces like dirt, you may want to opt for a slightly longer kickstand to account for any sinking. However, be aware that a kickstand that is too long may not provide sufficient stability on hard surfaces. Follow the steps above to find the perfect fit for your bike.Specifications:- Weight: 0.215 kg- Fits: 24´´-28´´- Mount: DV (KSA 18)- Adjustable: Yes. tradeinn Bikeinn