Bag of 2 15mm end Feed Stop (Known as Fittings/Plumbing Fittings / end/Stop stopend Also Available in 8mm, 10mm, 15mm, 22mm, 28mm, 35mm, 42mm and 54mm)
Featured
|
£ 3.64 |
To Shop
|
|
£ 3.64 |
To Shop
|
| COMPARE ALL WEBSHOPS (2) | ||
Description
Amazon
This listing is for a Pack of 2 To prepare copper pipe for end feed fittings, cut it square, deburr the edges, clean the pipe end and fitting socket to bright metal with an abrasive pad, and apply a thin layer of flux before assembly. Ensure there is zero standing water inside the pipe. Even a single drop of water turning to steam during heating will blow the molten solder out of the capillary gap. An end feed stopend (also known as a copper end cap or capillary blanking cap) is a solid copper fitting used to permanently seal or terminate the end of a copper pipe run. Like other end feed fittings, it has a plain socket that requires solder wire to be fed manually into the joint when heated with a torch. WRAS Approved and BS EN 1254 compliant
Description
(1)
This listing is for a Pack of 2 To prepare copper pipe for end feed fittings, cut it square, deburr the edges, clean the pipe end and fitting socket to bright metal with an abrasive pad, and apply a thin layer of flux before assembly. Ensure there is zero standing water inside the pipe. Even a single drop of water turning to steam during heating will blow the molten solder out of the capillary gap. An end feed stopend (also known as a copper end cap or capillary blanking cap) is a solid copper fitting used to permanently seal or terminate the end of a copper pipe run. Like other end feed fittings, it has a plain socket that requires solder wire to be fed manually into the joint when heated with a torch. WRAS Approved and BS EN 1254 compliant
Product specifications
Related results
