Be In Your Mind 1 Set Aircraft Model Gear Puller Remove Tools Trains Motor Pinion W010 Parts for RC

The removal tool is capable of extracting gears with a maximal outer diameter reaching 11mm and a tooth height that is less than 12mm. It is designed with precision and efficiency in mind, allowing for smooth and effortless removal of such gears. Comprises 5 pins for the diameter of the motor shaft, 0.9mm (cylindrical), 1.75mm (semi circular), 1.75mm (cylindrical), 1.9mm (cylindrical), 2.8mm (semi circular). Material upgrade: Utilize the material with a higher level of hardness, which is not liable to deform. This upgraded material also offers enhanced durability and resistance to wear and tear, ensuring a longer lifespan for the product. Installation: 1. Rotate the gear puller's rod and tighten the screw. 2. Insert the puller's rotating rod into the bracket. 3.Fit the sliding plate.4. Secure the motor in the travel plate and align the shaft with the pin.5. Evenly rotate the lever clockwise to extract the motor gear. Note: It is suggested that you go slowly when attempting to pull the gears off. Some pinion gears are firmly adhered to the motor. In such cases, please attempt to heat the gears up first. If the glue does not melt, it is not advisable for you to attempt to pull the pinion gears off.