bestarc Plasma Cutter, [Pilot Arc] [Large LED Display] [Air Sensor] 50A Cutting Machine 110/220V Dual Voltage, 1/2" Clean Cut 3/4" Maximum Cut, After Flow Mesh, New

[Powerful Cutting Ability] Dual voltage 110/220V is good for home, workshop and hardware store use. Professional performance in Iron, Steel aluminium and copper with Inverter IGBT Technology 1/2" clean cuts. Very strong for DIY and heavy duty projects. Maximum cutting thickness 12mm@35A 110V 50PSI; 18mm@50A 220V 65PSI. Dry and compressed air is required. Up to 40A@110V 35A power breaker; 30A@220V up to 50A. [Pilot Arc]: Bestarc plasma cutter with pilot arc function. It is high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate, which ensures that it can work on rust, painted or dirty metal surfaces. Adjustable PA function for extended pilot arc time, less energy consumption for non-interrupted work, reduced electrode burning and long cutting life. metal plasma corner [Air Sensor Technology]: The machine built air sensor shows the air pressure on the front panel of the machine. Users can manually adjust the air pressure via the air regulator (air pressure cannot be set automatically). The air filter is fitted in a machine equipped with a quick connect 1/4 NPT air connector ready to use straight out of the box. Once connected to an air compressor, the recommended air pressure must be within 65 PSI with a flow rate of 250 litres per minute. Note: Compressor needs to be purchased separately. [LED Display Display]: Central display of parameters such as display, air pressure, voltage and current, increasing operational efficiency by allowing users to understand the equipment condition in real time and adjust operations on time. If the plasma cutter can't work, the display comes with an error code making it easy to find problems. [2T/4T/PA/PT Function]: Adjustable postage time from 3-15 seconds to cool the torch. Adjust the cooling time of the torch head to extend the service life of the consumables. We recommend a cooling time of 4-8 seconds. PA function allows up to 15s pilot arc timing setting; ideal for longer periods of knit cutting, shorter periods help extend the life of consumables. Release your 2T/4T automatic cutting finger. 2T is a semi-automatic cutting control and 4T automatic cutting control.