BILITOOLS 18mm Jaw Opening Ball Joint Puller Tool compact bell-style separator, low-clearance access, tie rod end service for passenger cars & SUVs

【BALL JOINT & TIE ROD SERVICE】Designed to separate compatible ball joint studs and tapered tie rod ends from steering knuckles, steering arms, and related front-end linkages. This ball joint removal tool is intended for routine steering and suspension repairs that require separating tapered stud connections. 【COMPACT ACCESS】The low-profile bell-style body is easier to position around closely spaced steering and suspension components where larger pullers may not fit. Unlike an impact-style ball joint separator, the forcing screw applies pressure progressively without relying on repeated hammer blows. 【DURABLE CONSTRUCTION】Forged from 45# carbon steel and heat treated to help resist wear and deformation under pulling load. Bright chrome plating adds corrosion resistance and makes the tool easier to clean after service. 【PASSENGER CAR APPLICATIONS】Designed for mechanics and DIY users servicing compatible passenger cars, sedans, coupes, and compact SUVs during routine steering and suspension repairs. Its compact profile is especially useful as an outer tie rod removal tool where working space around the joint is limited. 【CHECK FIT & ALIGNMENT】Before ordering, measure the ball joint or tie rod connection and confirm that the puller opening, working depth, and surrounding clearance match your application. During use, make sure the puller is fully seated, keep the forcing screw centered on the stud, and apply pressure gradually. Stop if the tool shifts, slips, or cannot seat securely.