Compare webshops (1)
Sponsored links · Some shops pay us a fee
Shops with other sizes
The set contains 5 m of hook tape and 5 m of matching loop tape, both 16 mm wide and black. Sew one strip to each side of an opening for 5 m of finished fastening. For shorter closures, cut the two strips into equal lengths so each hook section has a matching loop section. The hook face feels rougher to the touch, while the loop face is soft. On a cuff, flap or removable cover, put the loop strip on the side that may brush against skin or snag nearby fabric when open. Press the two faces together along their length to close. The nylon tape has a plain back for stitching directly to fabric. Lay each strip with its fastening face out and hold it in position with clips or pins. Stitch around the edges, keeping the opening clear so the two sides can still be peeled apart. Allow 16 mm of clear fabric on each side of the opening. The slim strip fits garment tabs and narrow cuffs. Measure the finished tab between its edges, allowing for any seams, so the hooks stay covered when the tab closes. For a set of matching covers, sew one fastening first and check the fit with the cushion or insert in place. Use that cut length as a guide for the rest of the batch, keeping each hook piece with its matching loop piece as you work.