Bond It BDMI Superglue Activator Mitre Adhesive, Clear

Bond It Mitre Kit - Gap-Filling Adhesive &Amp; Accelerator (Box Of 12) DescriptionBond It Mitre Kit Is A High-Performance High-Viscosity Ethyl Cyanoacrylate Adhesive Combined With An Accelerator Spray Designed To Provide Rapid Bonding And Excellent Gap-Filling Properties. This Twin Pack Ensures A Fast Clean And Reliable Bond - Perfect For Fine Joints Such As Mitres Where Precision And Appearance Matter. It Is Ideal For Use On Porous And Uneven Surfaces Such As Mdf And Oak Making It A Favourite Among Joiners Carpenters And Fitters.Features &Amp; Benefits Rapid Bonding Parts Can Be Handled Almost Immediately Non-Drip Formula Ideal For Vertical Applications Gap-Filling Performance For Uneven Or Porous Surfaces Works Effectively On Difficult Substrates Such As Mdf And Oak Speeds Up Strength Development For Immediate Usability Suitable For Mdf Chipboard And All Common Timbers (Oak Pine Etc.) Pvcu And Most Plastics Rubber And Leather General Joinery And Woodworking Applications Decorative Mitres And Precise Bonding Work Limitations Not Suitable For Permanent Glass Bonding Do Not Use On Oily Or Greasy Surfaces May Cause Staining On Upvc If Accelerator Is Over-Applied - Always Test On A Small Area First Avoid Strong Light And High Heat Exposure Application Instructions Preparation: Ensure Both Surfaces Are Clean Dry And Free From Dust Oil Or Contaminants Accelerator: Spray Lightly Over One Surface And Allow To Dry. Use On The Least Visible Face Of The Joint Where Possible Adhesive: Apply Adhesive To The Opposite Surface And Immediately Bring The Two Parts Together Bonding: Apply Light Even Pressure Until The Bond Forms (Typically Within 10 Seconds) Clean-Up: Wipe Away Any Uncured Adhesive Using A Dry Cloth. Once Cured Remove Mechanically Technical Data Adhesive Type: Ethyl Cyanoacrylate Activator Type: Aerosol Accelerator Colour: Clear Viscosity (Adhesive): 14001700 Mpas Gap Filling: Up To 0.25 Mm Tensile Strength (Astm D2095): 20 Mpa Tensile Shear Strength (Astm D1002): 14 Mpa Service Temperature Range: -60C To +80C Grab: Very High Initial Grab Drying Time: 10 Seconds Flash Point: ≫ +81C (Adhesive) ≪ -40C (Activator) Flammability: Aerosol Extremely Flammable Density: 1.06 G/Cm Commodity Code: 3506990000 Storage &Amp; Shelf Life Shelf Life: Minimum 12 Months From Date Of Manufacture Storage Conditions: Store Upright In A Cool Dry Place Between +5C And +25C Protect From Frost Heat And Direct Sunlight See `More Information` below for sizing and Colour detailsPTDTSADIRBONDBDMI12

A high strength bonding system comprising a cyanoacrylate adhesive and an aerosol activator Can be used for bonding MDF, wood, rubber and most plastics Instant bonding properties considerably reduce assembly times Cures in approximately 10 seconds