Bondloc 28 Bright Ring Shank Stick Nails 3.1 x 90MM (Pack 2000)

Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx. 25) and less of them are loaded into the nailer the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required for example a one way disposal pallet. As all standard nails come with this finish. Galvanising or coating with Zinc is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail but is corroded first. The thicker the zinc coating the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB FW28WW-E N100SPTDBOSS310R90

General description These Bostitch S310R90 28 Bright Ring Shank Stick Nails are designed for the construction market, providing a reliable fastening solution. With a gauge of 3.1 mm and a length of 90 mm, these nails come in a pack of 2000. The traditional wire weld collation offers enhanced rigidity and resistance to damp environments, making them suitable for various applications. Technical specifications Gauge/Diameter: 3.1 mm Length: 90 mm Collation Angle: 28° SKU: S310R90 Profile: Ring Finish: Bright Quantity per box: 2000 Compatibility and accessories Compatible with N80SB, FW28WW-E, N100S stick nailers. Usage Ideal for applications where no protection is required, such as one-way disposal pallets. Best used with tools fitted with a sequential trip, especially when working at height. Other information