Bondloc B572 Pipe Seal Slow Cure 50ml BONB57250

Power Tools Direct

Bondloc B572 White Pipe Seal is designed for the locking and sealing of metal pipes and fittings. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. The thixotropic nature reduces the migration of liquid product after application to the substrate. Has a good chemical/solvent resistance to Ethanol Motor Oil Unleaded Petrol and Brake Fluid. B572 is unusual in that it does not fully cure until some 60 hours after application allowing for re-alignment of elbows and joints. Replaces tapes and dopes stops gas and fluid leaks on most metals and assists in lubricating during assembly. Will not shred or tear which would contaminate your system. Use it to seal against oils gases chemicals water and steam etc. Specifications: Resin: Dimethacrylate.Colour: White paste.Cure speed with activator: Not recommended.Cure speed Without Activator: up to 60 hours.Viscosity Brookfield Sp3 @ 20rpm: 20 000cps.Gap fill / Max threadform: 0.4 mm / M36.Flash Point: >85°C.Shelf Life: 36 months @ 20°C. Specific Gravity: 1.25.Max Operating Temperature: -55°C to + 150°C. Cured Performance: Full Cure Time: 60 hours.Typical breakaway strength: 6 N.m.Typical prevailing strength: 2 N.m. Size: 50ml.PTDBONB57250

ManoMano

General description Bondloc B572 White Pipe Seal is a high-performance sealant designed for locking and sealing metal pipes and fittings. It cures in the absence of air between closely fitting metal surfaces, preventing loosening and leaks caused by shock and vibration. The product forms a durable, chemical-resistant seal that can withstand various fluids and gases. Technical specifications Resin: Dimethacrylate Color: White paste Cure time without activator: Up to 60 hours Viscosity: 20,000 cps (Brookfield Sp3 @ 20 rpm) Maximum gap fill / thread size: 0.4 mm / M36 Flash point: >85°C Shelf life: 36 months at 20°C Specific gravity: 1.25 Maximum operating temperature: -55°C to +150°C Typical breakaway strength: 6 N·m Typical prevailing strength: 2 N·m Size: 50ml Compatibility and accessories Suitable for most metals and fittings Replaces tapes and dopes for sealing Assists in lubrication during assembly Installation Apply the sealant to clean, dry metal surfaces Ensure surfaces are

Amazon

B572 Pipe Seal Slow Cure 50ml Bondloc Accessories