Bondtech CHT coated brass nozzle M6, 1.75mm x 0.40mm

123-3D UK

This brass Bondtech CHT nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 0.40mm and is suitable for filament with a diameter of 1.75mm and also compatible with 2.85mm filament.Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands so that the filament melts faster and higher flow rates can be achieved.The nozzle is compatible with the following hotends/blocks: Mosquito®/Magnum Mosquito® Liquid Mosquito® Magnum+ Copperhead™ E3D V4, V5 and V6 blocks E3D Chimera and Kraken RepRap M6

Amazon

These are nozzles for High Flow applications Bondtech CHT nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.