Bondtech CHT Volcano brass coated nozzle M6, 1.75mm x 0.40mm

TechInn

Bondtech Cht Vol Coated Brass 0.4 Mm 3d Printer Nozzle. EU Plug.This Bondtech CHT ® VOLcano nozzle increases the melting capacity of your hotend, to build faster and to save your time.It also improves the layer adhesion of your 3D prints to create stronger parts.Nozzles for 3D printers made of metal with at least one or a multitude of holes to increase the standard circular surface area of the heating walls.Features:- Higher melt capacity by increasing the surface area of the heating walls.- Machined with ultra-precision.- Brass nozzle with Nickel coated surface.Specifications:- Sizes:0.40mm.- Optimized for 1.75mm filament.- Compatible with 2.85mm filament.- Requires 6mm wrench.- Flow Rate gains between 25 and 65% (check picture with test data) Compatibility:This Bondtech CHT nozzle fits the following hotends/blocks:- E3D Volcano blocks.- Other Volcano type blocks.- Artillery Sidewinder X1 and X2.- Anycubic Vyper.- Creality K1 & K1 Max.- FLSUN Super Racer.- Artillery Genius Pro.- Anycubic Kobra and Kobra Max.- Lulzbot TAZ MOARstruder.- Others compatible with Volcano Technology:Advantages of the Bondtech CHT ®:- Bondtech CHT ® nozzles split the filament into 3 thinner strands allowing to melt the material from within.In doing so, the material melts faster and higher flow rates can be used.Core Heating is a patented:- Nozzles for 3D printers made of metal with at least one or a multitude of holes to increase the surface area of the heating walls.Advantages of the Nickel Coating:- A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion.Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle´s surface. tradeinn Techinn

123-3D UK

The Bondtech CHT Volcano nozzle M6 has a brass coating and is highly resistant to corrosion. In addition, the friction is low, so that filament is extruded smoothly. It has an opening of 0.40mm and is suitable for filament with a diameter of 1.75mm, but also compatible with 2.85mm filament.Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands, so that the filament melts faster and higher flow rates can be achieved.The nozzle is compatible with the following hotends/blocks: Mosquito® / Magnum Mosquito® Liquid Mosquito® Magnum+ Copperhead™ E3D V4, V5 and V6 blocks E3D Chimera and Kraken RepRap M6

Amazon

These are nozzles for High Flow applications, They are manufactured by Bondtech in-house. Compatible with 2.85mm filament Bondtech CHT nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used.