Brompton Be Seen Lights

Amazon

New for 2023, a set of front and rear lights from Brompton to help you been seen on the road. These lights are rechargeable. Note - Compatible with all Brompton folding bikes fitted with post 2013 brake levers and fitted with a Brompton saddle with the mounting point under the saddle Output: Front - 26 lumens Rear - 11 lumens. Modes: High, Low, Flash, Pulse and Strobe Run Time: High: 2 hours, Low: 5 hours, Flash: 10 hours (200ms/300ms), Pulse: 25 hours, Strobe:10 hours Charge_Time: 1.5 hours to full Weight: TBC Water / IP Rating: IP65 (dust and water jet tight) Charging by Micro USB, 5V 1A. Charging cable not included What is in the box? A 26 lumen front light (white) An 11 Lumen rear light (red) Fixings Instructions on how to fit and use Front light: The front light fits to the Brompton Integrated brake lever First align the mounting block with the groove on brake lever, place the handlebar mount on the handlebar mounting block making sure the holes aligned insert the two M3 socket head screws and tighten To fix the light, place the light on the mount, with the power button lining up with the symbol on the mount, then turn the light clockwise until it locks in place Tools required: 2.5mm Allen key / hex wrench Rear light: The rear light fits underneath the Brompton saddle (only the Brompton saddle!) First install the mount into the saddle and insert the M5 button head screw and tighten To fix the light, place the light on the mount, with the power button signing up with the symbol on the mount, then turn the light clockwise until it locks in place Tools required: 3mm Allen key / hex wrench

Blacks

They fit neatly on your handlebars and saddle working in tandem with the main lights above your wheels. For pedestrians,drivers or other riders, the diffused wide angle glow makes you brilliantly visibly without blinding glare.It’s good to be seen on your Brompton.