Brother HSE261E Heat Shrink Tube Tape - 31mm x 1.5m - Black on White

The heat shrink cable identification tube is a 31mm wide, non-adhesive solution for marking electrical wires and cables. It is designed to be placed over a cable or terminating connector and, when heated, shrinks to grip the object for secure identification. The tube is made of polyolefin and is supplied in a length of 1.5 metres. It remains tight without the need for adhesive, making it suitable for warm environments where labels must stay in place. The tubes are compatible with Brother P-Touch label makers and are intended for use on cables with diameters roughly in the 6.3–20 mm range, providing clear, durable labels that remain readable after shrinking. Temperature guidance indicates activation around 110 °C to 140 °C, delivering crisp results with a professional appearance.

Additional notes:

• The system relies on shrinking the printed tube to about half its original width when heated.
• The tube is printed first, then opened and placed over the target cable or connector, before shrinking.

Features

• 31mm wide, non-adhesive heat shrink tube
• Polyolefin material; 1.5m length
• Shrinks on heating to grip the cable
• Suitable for 6.3–20 mm diameter cables
• Compatible with Brother label makers

Usage

1. Print identification details on the tube.
2. Open the printed tube and pass it over the cable or connector.
3. Position over the target area.
4. Heat with a heat gun to shrink and secure the label.