CB antenna PNI ML75, foldable, 26 28MHz, 300W with magnetic base included, length 90cm

Pni Ml75 Magnetic Base Cb Antenna. Enhance your communication with the PNI ML75 CB antenna. This 75cm, 26-28MHz antenna offers up to 8km range and handles 300W peak power with an excellent SWR. Its key feature is the 90-degree tilt for navigating low clearances. Made from durable stainless steel with a PL connector, it´s ideal for trucks and cars. It´s compatible with PL magnetic bases and fixed mounts. For optimal performance, consider the PNI T601 4m RG58 coaxial cable. PNI-ML75FC PNI ML75 CB antenna, length 75cm, 26-28MHz, 300W, foldable, without accessoriesCB antenna without cable:- The PNI ML75 CB antenna operates in the 26-28 MHz frequency range. It is 75 cm long and can communicate over a distance of up to 8 km (under ideal conditions of use).The PNI ML75 is perfect for drivers of TIRs, trucks or cars who want a product that ensures good communication in traffic.The SWR of less than 1.2:1 and the maximum power supported of 300W (for a short time) are essential specifications that recommend this product to the most demanding users.PL type thread antenna:- When choosing a CB antenna, the following aspects must be considered:the method of attaching the antenna (fixed support or magnetic base)antenna length and antenna positioning on your car or truck.The CB antenna is very important in the station - antenna assembly because the quality of the transmitted and received signal depends on it.The PNI ML75 CB antenna is one of the few PL antennas that can be tilted 90 degrees to enter passages, garages or low-height parking lots.Compatible NIBP accessories:- The PNI ML75 CB antenna with ø16mm thread is compatible with all PL type magnetic bases. For example: PNI 145/PL and with fixed mounting supports:Compatibility:- The PNI T601 cable can be used to mount a PL type antenna.Length:- The cable length is 4m, allowing you to mount the antenna wherever it is convenient for you on the vehicle and still have enough time to make the connection to the CB radio station.RG58 cable:- The cable used is of very good quality RG58 coaxial type with maximum performance in terms of transmission and reception.Technical specifications:PNI-ML75FC - PNI ML75 CB antenna, length 75cm, 26-28MHz, 300W, foldable, without accessories:General:- Working frequency: 26 - 28 MHz- Maximum applied power: 40 W continuous / 300 W for a short time- Minimum SWR in the center of the band: less than 1.2:1- Length: 750mm- Impedance: 50 Ohms- Material: Stainless steel- Connector type: PL- Hole diameter: 16 mm- Weight: 343 grams- size: 750 X 40 X 40 mm- Polarization: vertically- Working distance: 7 km- Operating temperature: -26°C ~ +80°C- tiltable: Yes, up to 90 degreesIn the box:- Radio station antenna: Yes- Rubber support: YesPNI-T601 - PNI T601 connection cable for threaded antennas includes PL259 plug, length 528 cm:General:- Length: 528 cm- jack: PL 259- Cable type: RG58 coaxial- Compatible with: Threaded antennas. tradeinn Motardinn

The PNI ML75 CB antenna operates in the 26-28 MHz frequency range. It is 75 cm long and can communicate over a distance of up to 8 km (under ideal conditions of use). The PNI ML75 CB antenna is one of the few PL antennas that can be tilted 90 degrees to enter low-height passages, garages or parking lots. The base from PNI 145/PL has a quality cable with a length of 4 m, which allows placing the antenna on the dome of the car without any problem, and placing the cable so as not to disturb the passengers.