Compare webshops (1)
Ceramizer One-Shot is an engine treatment with a modified formula compared to the classic Ceramizer CS. A single One-Shot dose is intended for one oil change. Using Ceramizer One-Shot ensures driving comfort for up to 15,000 km. The core function of Ceramizer One-Shot is to create a regenerative and protective coating on metal friction surfaces within the engine. This coating fills in any wear and deformations, providing regeneration in key areas such as piston rings, cylinder walls, and bearings. As a result, the entire mechanism is protected from further wear. The protective layer works similarly to a very thin weld overlay, adding extra material to worn-out areas. The oil additive forms the protective coating over the course of 1,500 km and remains effective for up to 15,000 km. After reaching this distance, another dose should be applied to maintain its regenerative and protective properties. Why Use Ceramizer One-Shot Oil Additive? Restores Engine Power and Efficiency – The surfaces affected by friction regenerate, becoming more durable and resistant to further wear. / Reduces Fuel Consumption – Savings of 3% to 15% can be observed. / Easier Engine Start-Up – Even in low temperatures. / Prevents Excessive Oil Consumption – The engine runs quieter, with fewer vibrations, and emits less exhaust fumes. How to Use Ceramizer One-Shot? Warm up the engine to its operating temperature (80–90°C), either after driving or after at least 10 minutes of idling. Turn off the engine. / Unscrew the oil filler cap and pour the contents of the applicator(s) into the oil filler opening. / Start the engine and let it idle for 15 minutes. Drive carefully for 200 km / After driving 200 km or idling for 4 hours, the vehicle can be driven without high RPM restrictions. The ceramic-metal layer continues forming for up to 1,500 km, but under normal operating conditions. Do not change the oil during this period.