CHRIS ALSOP Guitar Fret Bevel File. Diamond Dual Angle 35 and 90 Degrees.
Prices from
41.10
Featured
|
£ 41.10 |
To Shop
|
|
£ 41.10 |
To Shop
|
| COMPARE ALL WEBSHOPS (2) | ||
Description
Amazon
Diamond File Length of 150mm Dual Bevel Angle of 35 or 90 degrees For filing the ends of the frets level with the ends of the fretboard the file can be set at 90 degrees For beveling the fret end at 35 degrees the file can be set accordingly Easily accessible allen bolts clamp the file securely in either position Smooth base made of low friction polymer, with bevelled at the ends. This base makes it easy to pass over the fret tops without bumping or damage The bevel file is a fine grit diamond file which leaves a good finish and all that is needed is the final light sanding to remove any scratches or uncomfortable edges Included an advice sheet on using this tool and a comprehensive guide to fret replacement
Description
(1)
Diamond File Length of 150mm Dual Bevel Angle of 35 or 90 degrees For filing the ends of the frets level with the ends of the fretboard the file can be set at 90 degrees For beveling the fret end at 35 degrees the file can be set accordingly Easily accessible allen bolts clamp the file securely in either position Smooth base made of low friction polymer, with bevelled at the ends. This base makes it easy to pass over the fret tops without bumping or damage The bevel file is a fine grit diamond file which leaves a good finish and all that is needed is the final light sanding to remove any scratches or uncomfortable edges Included an advice sheet on using this tool and a comprehensive guide to fret replacement
Product specifications
Related results
Featured Choice
£ 41.10
