Creality Space Pi Filament Dryer

Get the most out of your 3D prints with the Creality Space Pi Filament Dryer. This box ensures that your filament is in optimal condition when you print with it. This way you are assured of fantastic prints that are printed without any problems. The Space Pi Plus dries the filament during the printing process, so you no longer have to worry about clogging, poor adhesion and shifting of layers. By combining this box with a high speed filament and printer you have an even better high speed printing experience with great results.Uniform temperature & dryingThis box uses the advanced PTC heating system that ensures uniform drying of the filament. It is a sustainable, energy-saving and eco-friendly way of heating. The built-in fan ensures that the warm air from the heating system is distributed 360º, which draws all the moisture from the filament. Use the 12 preset settings for specific filaments. You can also independently change the temperature between 45 graden and 70 graden.Easy to useThe 4-inch LCD screen makes it easy to operate the dryer. This way you can easily see a countdown and monitor the temperature and humidity in the box. The timer can be set between 0 and 48 hours, so that you can be sure that your filament has been dried optimally. You do not have to re-enter all the settings after a power outage, because the Space Pi remembers the material and temperature settings. It is even possible to use this machine with both 1.75 and 2.85mm filament.

Eliminate moisture and failed prints with the Creality Space PI Filament Dryer. This upgraded dehydrator and storage box is the essential accessory for any 3D printing enthusiast. Featuring a powerful 110W PTC hot-air heating system, it generates a consistent 360° circulation of warm air to effectively remove excess moisture from your spools. This process ensures stronger layer adhesion, eliminates bubbling and stringing, and delivers flawless, high-quality prints every time.Designed for ultimate compatibility, the Space PI accommodates a wide range of materials including moisture-sensitive Nylon, ABS, PETG, as well as PLA and TPU. Its spacious interior effortlessly fits most standard 1kg spools, supporting both 1.75mm and 2.85mm filament diameters. The intuitive digital control panel allows for precise temperature adjustments from 35-55°C, while the clear lid lets you monitor your filament throughout the drying process. Keep your filaments perfectly dry and ready to use, transforming your printing experience with reliability and ease.