Decoranddecor Internal Door Handles Bath Lock Kit Lever On Rose with Turn and Release (Brushed Chrome)

In the box: two lever handles on round roses plus a 2.5 inch bathroom lock with turn and release and strike plate, a square spindle, two return springs, ten wood screws and a hex key. A complete door handle set, supplied as door handles internal sets ready to fit. Duo finish: the round rose and the lever collar are polished chrome and the lever bar is brushed chrome, so one handle carries a bright and a soft grey tone. As silver door handles interior schemes go, chrome internal door handles are the easiest finish to match to taps and hinges. Sizes: a 129 mm lever on a 54 mm round rose, 62 mm projection, 10.5 mm rose thickness and a 20 mm round grip. Lever door handles internal doors from 35 to 42 mm thick are covered by the push to fit rose and the 8 by 8 by 90 mm square spindle. The turn locks the door from the inside and the release opens it from the outside in an emergency, which is what a bathroom, an en suite or a cloakroom needs. These internal door handles fit doors hung on either side, so one set works on a left hand or a right hand door. Fire rating: the bathroom lock supplied here is fire rated to FD30 with a 1 mm intumescent pad and to FD60 with a 2 mm pad. The pad is not supplied, so order one separately if you are fitting a fire door. The mortice lock body is made to EN 12209 and carries CE and UKCA marking. Please note: hinges are not included, and the lock supplied is a bathroom privacy turn, not a keyed security lock.