DIGITUS network Tester & cable - PoE Testing Device Automatic Scan RJ45 RJ11 ISDN BNC LAN coax

Prices from
19.49

Sponsored links

COMPARE ALL WEBSHOPS (2)

Description

TechInn Digitus Rj45+bnc Cable Tester Black . Effortlessly verify your network cabling with the DIGITUS RJ45+BNC Cable Tester. This versatile tool simplifies identifying correct PIN assignments for 10Base-T, 10Base-2, RJ45/TM11, and various standard cables (258A, TIA-568A/B, Token Ring). Test installed cables remotely for complete installation verification. Detect continuity, short circuits, and crossed wires with precision. The integrated PoE tester identifies PoE presence and mode (af & at compatible). Supports all network cables from CAT 3 to CAT 7A, plus UAE, TAE, and telephone cables. Includes main unit, remote unit, PoE tester, adapters, and a protective case for comprehensive cable testing and troubleshooting. The LAN tester makes it easy to identify the correct PIN assignment of 10Base-T, 10Base-2, RJ45/TM11 modular cables as well as 258A, TIA-568A/568B and token ring cables by comparing the outgoing cable end with the corresponding receiving cable end. With the remote tester, you can test cables that are installed at a different location, for instance in wall distributors or patch fields. Easy identification of cabling is guaranteed.Features:Future-oriented standards and high-end quality for your network:- With the cable tester, you can easily check that the network cabling has been done correctly and immediately detect if the Ethernet cable is properly connected.- In addition to the pure continuity test, it is also possible to check that the two cores have not been mixed up or caused a short circuit - thanks to the remote unit, even with the laying cables already installed.- Depending on the situation, you can switch between a manual test and an automatic test loop that systematically tests one wire after another and then starts over.- The PoE tester shows whether the PoE signal is present in a port or network socket and what PoE mode it is - PoE Finder is compatible with PoE af & at standards.- The test device is suitable for all network cables from CAT 3 and Coax-BNC through CAT 5 and CAT 6 to CAT 7A as well as UAE, TAE and telephone cables and helps e.g. with cable installation for DSL connection.Specification:- Product dimensions (main device): 80 x 55 x 25 mm (H x W x D)- Product dimensions (remote): 80 x 25 x 25 mm (H x W x D)- Product dimensions (hard shell case): 46 x 180 x 120 mm (H x W x D)Package content:- 1 x main device- 1 x remote device- 1 x PoE test devices- 2 x kabel adaptera BNC- 1 x BNC Stecker Plug / Plug Adapter- Adapter 3x RJ45 do RJ11- 1 x User Manual- 1 x hard shell case. tradeinn Techinn

Compare webshops (2)

Sponsored links · Some shops pay us a fee

Sort by:

£ 19.49

£ 22.11

Description (1)

Digitus Rj45+bnc Cable Tester Black . Effortlessly verify your network cabling with the DIGITUS RJ45+BNC Cable Tester. This versatile tool simplifies identifying correct PIN assignments for 10Base-T, 10Base-2, RJ45/TM11, and various standard cables (258A, TIA-568A/B, Token Ring). Test installed cables remotely for complete installation verification. Detect continuity, short circuits, and crossed wires with precision. The integrated PoE tester identifies PoE presence and mode (af & at compatible). Supports all network cables from CAT 3 to CAT 7A, plus UAE, TAE, and telephone cables. Includes main unit, remote unit, PoE tester, adapters, and a protective case for comprehensive cable testing and troubleshooting. The LAN tester makes it easy to identify the correct PIN assignment of 10Base-T, 10Base-2, RJ45/TM11 modular cables as well as 258A, TIA-568A/568B and token ring cables by comparing the outgoing cable end with the corresponding receiving cable end. With the remote tester, you can test cables that are installed at a different location, for instance in wall distributors or patch fields. Easy identification of cabling is guaranteed.Features:Future-oriented standards and high-end quality for your network:- With the cable tester, you can easily check that the network cabling has been done correctly and immediately detect if the Ethernet cable is properly connected.- In addition to the pure continuity test, it is also possible to check that the two cores have not been mixed up or caused a short circuit - thanks to the remote unit, even with the laying cables already installed.- Depending on the situation, you can switch between a manual test and an automatic test loop that systematically tests one wire after another and then starts over.- The PoE tester shows whether the PoE signal is present in a port or network socket and what PoE mode it is - PoE Finder is compatible with PoE af & at standards.- The test device is suitable for all network cables from CAT 3 and Coax-BNC through CAT 5 and CAT 6 to CAT 7A as well as UAE, TAE and telephone cables and helps e.g. with cable installation for DSL connection.Specification:- Product dimensions (main device): 80 x 55 x 25 mm (H x W x D)- Product dimensions (remote): 80 x 25 x 25 mm (H x W x D)- Product dimensions (hard shell case): 46 x 180 x 120 mm (H x W x D)Package content:- 1 x main device- 1 x remote device- 1 x PoE test devices- 2 x kabel adaptera BNC- 1 x BNC Stecker Plug / Plug Adapter- Adapter 3x RJ45 do RJ11- 1 x User Manual- 1 x hard shell case. tradeinn Techinn


Product specifications

Brand DIGITUS
EAN
  • 4016032458692
Material
  • Na
Color
  • Black
  • Na
Size
  • One Size
Gender
  • Unisex
MPN
  • DOESNOTAPPLY
  • ‎DN-14001-1


Price History

Prices were last updated on:

Featured Choice
£ 19.49
To Shop